Derbyshire · England

Extra bedroom and en-suite extensions in Derbyshire

Our extra bedroom and en-suite extensions service covers the whole of Derbyshire. Choose your town below or book a free visit straight away.

Derbyshire at a glance

Nation
England
Price region
East Midlands
Postcode areas
DE, NG, S, SK
Towns covered
22 listed below, plus surrounding villages
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Site visits
Free, no obligation

What an extra bedroom and en-suite extension involves

An extra bedroom and en-suite extension is a two-storey extension planned around a new double bedroom with its own shower room on the first floor, with a ground-floor room below. It is one of the most effective ways to add space for a growing family. Nationwide's 2025 research linked adding a double bedroom and bathroom to a three-bed, one-bathroom house with value gains of up to 24%.

The main places we list in Derbyshire are Derby (DE1), Chesterfield (S40), Long Eaton (DE72), Ilkeston (DE7), Swadlincote (DE11) and Staveley (S43). We cover the villages in between too.

Guide price in the East Midlands

Using our East Midlands rates, an extra bedroom and en-suite extension with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £55,000–£74,000 (plus £5,500–£11,000 for the en-suite), including VAT. Bigger or more glazed designs cost more per m². The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

SpecPer m²Typical project
Essential£1,800–£2,430 per m²£50,500–£68,000
Standard£1,960–£2,650 per m²£55,000–£74,000
Premium£2,350–£3,180 per m²£66,000–£89,000

Rules in England

In England, an extra bedroom extension at the rear can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary. Upper side windows, including en-suite windows, must be obscure-glazed and non-opening below 1.7 m. Side or deeper designs need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

The Party Wall etc. Act 1996 applies, so notices may be needed for work on or near a shared wall or boundary.

Getting the design right

Sound and privacy

Bedrooms above a kitchen or family room benefit from an insulated floor to reduce noise. Side-facing upstairs windows usually have to be obscure-glazed, so we place the main bedroom window to the rear and the en-suite window to the side where possible.

Escape window and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and high, and the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs. We design the windows to meet this.

How we work in Derbyshire

  1. Start at your house

    We come to your home in Derbyshire, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.

  2. Plans, then approval

    Measured survey, design, then the right approval route for your house. We explain each step before we take it.

  3. Structure and building control

    A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.

  4. On site

    One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Towns we cover in Derbyshire

Extra bedroom and en-suite extensions in Derbyshire: questions

How much does an extra bedroom and en-suite extension cost in Derbyshire?

In the East Midlands our guide is £1,960–£2,650 per m² including VAT, so about £55,000–£74,000 (plus £5,500–£11,000 for the en-suite) for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Essential and Premium specs move that by roughly 8% down or 20% up.

How big should a new double bedroom be?

There is no legal minimum size for a bedroom in a house you own, so the test is whether it works. A comfortable double needs room for the bed with space to walk round it, wardrobes and a door that opens freely. We draw furniture on the plans so you can judge the space before anything is built.

Can an en-suite go in a room with no window?

Yes. A shower room without a window is allowed, provided it has a mechanical extract fan to the outside that meets Part F. Many people prefer a window for daylight, but if it faces a neighbour it will usually need obscure glass. We plan the extract route early so the duct is hidden.

What goes on the ground floor below a new bedroom?

Whatever suits you: a bigger kitchen, a family room, a study, a utility or a downstairs shower room. The ground floor usually costs about the same whatever it is used for, apart from kitchen units and bathroom fittings, which are priced separately.

Will I need planning permission in Derbyshire?

Derbyshire is in England. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.

Neighbouring areas

All extension services in Derbyshire · About extra bedroom and en-suite extensions

Ready to see what a second storey could do for your home?

Book a free site visit. We'll look at your house, talk through options and explain the approvals you'd need, then price the design stage in writing.

CallGuide price