Extra bedroom and en-suite extensions in Felixstowe

Felixstowe: the key facts for this kind of project.

Postcode districts: IP11
County / area: Suffolk, England
Price region: East of England
Guide price: £57,500–£78,000 (£2,060–£2,780 per m²), plus £5,500–£11,000 for the en-suite
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Harwich (3.2 miles), Kesgrave (8.4 miles), Walton-on-the-Naze (8.7 miles)
Distance to Ipswich: about 10.6 miles
First visit: Free, no obligation

About an extra bedroom and en-suite extension

An extra bedroom and en-suite extension is a two-storey extension planned around a new double bedroom with its own shower room on the first floor, with a ground-floor room below. It is one of the most effective ways to add space for a growing family. Nationwide's 2025 research linked adding a double bedroom and bathroom to a three-bed, one-bathroom house with value gains of up to 24%.

Around Felixstowe we also work in Harwich, Kesgrave and Walton-on-the-Naze, and across the rest of Suffolk. Postcode district in and near Felixstowe: IP11.

What it costs in Felixstowe

Using our East of England rates, an extra bedroom and en-suite extension with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £57,500–£78,000 (plus £5,500–£11,000 for the en-suite), including VAT. Bigger or more glazed designs cost more per m². Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£1,900–£2,560 per m²	£53,000–£71,500
Standard	£2,060–£2,780 per m²	£57,500–£78,000
Premium	£2,470–£3,340 per m²	£69,000–£93,500

Planning and building regulations in Felixstowe

In England, an extra bedroom extension at the rear can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary. Upper side windows, including en-suite windows, must be obscure-glazed and non-opening below 1.7 m. Side or deeper designs need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Felixstowe homes

Escape window and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and high, and the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs. We design the windows to meet this.

Planning the en-suite

An en-suite needs a route for the soil pipe to the drains, enough fall for waste water and an extract fan to the outside under Part F. Placing it over the ground-floor utility or near an existing drain keeps pipework short and hidden.

How we'd run your project

Look at the house
We start in Felixstowe with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Design and approvals
We draw the extension and check it against the rules for England, then apply for planning permission or a certificate of lawfulness, whichever fits.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about extra bedroom and en-suite extensions in Felixstowe

How long does an extra bedroom and en-suite extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Who handles building regulations for a project in Felixstowe?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Felixstowe?

We cover Felixstowe (IP11) and nearby places including Harwich, Kesgrave and Walton-on-the-Naze, plus the rest of Suffolk. The first site visit is free.

Does an extra bedroom add value to my house?

It usually does, though not always by the full cost. Nationwide's 2025 research found that adding a double bedroom to a two-bed house was linked to about 13% higher value, and a double bedroom and bathroom on a three-bed, one-bathroom house up to 24%. Local ceiling prices still apply.

How big should a new double bedroom be?

There is no legal minimum size for a bedroom in a house you own, so the test is whether it works. A comfortable double needs room for the bed with space to walk round it, wardrobes and a door that opens freely. We draw furniture on the plans so you can judge the space before anything is built.

Nearby

Nearby towns we cover for extra bedroom and en-suite extensions:

Other extensions in Felixstowe

All two-storey extension services in Felixstowe · Extra bedroom and en-suite extensions across Suffolk

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.