Extra bedroom and en-suite extensions in Retford
Thinking about an extra bedroom and en-suite extension in Retford? We design it, take it through the approvals it needs and build it, with one team responsible from the first visit to the final certificate.
The basics for Retford at a glance.
- Postcode districts
- DN10 and DN22
- County / area
- Nottinghamshire, England
- Price region
- East Midlands
- Guide price
- £55,000–£74,000 (£1,960–£2,650 per m²), plus £5,500–£11,000 for the en-suite
- Approval route
- It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
- Nearest towns
- Worksop (7.6 miles), Gainsborough (8.4 miles), Boughton (8.6 miles)
- Distance to Nottingham
- about 26.9 miles
- First visit
- Free, no obligation
About an extra bedroom and en-suite extension
An extra bedroom and en-suite extension is a two-storey extension planned around a new double bedroom with its own shower room on the first floor, with a ground-floor room below. It is one of the most effective ways to add space for a growing family. Nationwide's 2025 research linked adding a double bedroom and bathroom to a three-bed, one-bathroom house with value gains of up to 24%.
We cover Retford (DN10 and DN22) and the places around it, including Worksop (7.6 miles), Gainsborough (8.4 miles) and Boughton.
What it costs in Retford
A guide price for Retford: around £55,000–£74,000 (plus £5,500–£11,000 for the en-suite) for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). That works out at £1,960–£2,650 per m² of new floor space, including VAT at 20%. Professional fees for drawings and the structural engineer are listed separately on our prices page.
| Spec | Per m² | A 4 m × 3.5 m footprint on two floors (28 m² of new floor space) |
|---|---|---|
| Essential | £1,800–£2,430 per m² | £50,500–£68,000 |
| Standard | £1,960–£2,650 per m² | £55,000–£74,000 |
| Premium | £2,350–£3,180 per m² | £66,000–£89,000 |
Planning and building regulations in Retford
In England, an extra bedroom extension at the rear can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary. Upper side windows, including en-suite windows, must be obscure-glazed and non-opening below 1.7 m. Side or deeper designs need planning permission, costing £548 (or £575 for applications made from 8 December 2026).
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Retford homes
Planning the en-suite
An en-suite needs a route for the soil pipe to the drains, enough fall for waste water and an extract fan to the outside under Part F. Placing it over the ground-floor utility or near an existing drain keeps pipework short and hidden.
Sound and privacy
Bedrooms above a kitchen or family room benefit from an insulated floor to reduce noise. Side-facing upstairs windows usually have to be obscure-glazed, so we place the main bedroom window to the rear and the en-suite window to the side where possible.
How we'd run your project
Visit and first ideas
One of our team visits your house in Retford, checks the walls, roof and drains, and sketches out options with you.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.
Questions about extra bedroom and en-suite extensions in Retford
How much does an extra bedroom and en-suite extension cost in Retford?
Our guide for the East Midlands, which covers Retford, is £1,960–£2,650 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £55,000–£74,000 (plus £5,500–£11,000 for the en-suite). Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Which postcodes do you cover around Retford?
We cover Retford (DN10 and DN22) and nearby places including Worksop, Gainsborough and Boughton, plus the rest of Nottinghamshire. The first site visit is free.
Who handles building regulations for a project in Retford?
We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
Does an extra bedroom add value to my house?
It usually does, though not always by the full cost. Nationwide's 2025 research found that adding a double bedroom to a two-bed house was linked to about 13% higher value, and a double bedroom and bathroom on a three-bed, one-bathroom house up to 24%. Local ceiling prices still apply.
Can an en-suite go in a room with no window?
Yes. A shower room without a window is allowed, provided it has a mechanical extract fan to the outside that meets Part F. Many people prefer a window for daylight, but if it faces a neighbour it will usually need obscure glass. We plan the extract route early so the duct is hidden.
Nearby
Nearby towns we cover for extra bedroom and en-suite extensions:
Other extensions in Retford
All two-storey extension services in Retford · Extra bedroom and en-suite extensions across Nottinghamshire
Book a free site visit in Retford and we'll tell you what's possible, what approvals you need and what the design stage would cost.