Extra bedroom and en-suite extensions in Ryton

What we'd confirm first for a project in Ryton.

Postcode districts: TF11
County / area: Shropshire, England
Price region: West Midlands
Guide price: £56,000–£75,500 (£2,000–£2,700 per m²), plus £5,500–£11,000 for the en-suite
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Telford (5.9 miles), Bridgnorth (6.3 miles), Codsall (6.3 miles)
Distance to Telford: about 5.9 miles
First visit: Free, no obligation

About an extra bedroom and en-suite extension

An extra bedroom and en-suite extension is a two-storey extension planned around a new double bedroom with its own shower room on the first floor, with a ground-floor room below. It is one of the most effective ways to add space for a growing family. Nationwide's 2025 research linked adding a double bedroom and bathroom to a three-bed, one-bathroom house with value gains of up to 24%.

We cover Ryton (TF11) and the places around it, including Telford (5.9 miles), Bridgnorth (6.3 miles) and Codsall.

What it costs in Ryton

Guide prices for extra bedroom and en-suite extensions in the West Midlands are around £2,000–£2,700 per m² of new floor space, including VAT. For a typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space), that's roughly £56,000–£75,500 (plus £5,500–£11,000 for the en-suite). Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£1,840–£2,480 per m²	£51,500–£69,500
Standard	£2,000–£2,700 per m²	£56,000–£75,500
Premium	£2,400–£3,240 per m²	£67,000–£90,500

Planning and building regulations in Ryton

In England, an extra bedroom extension at the rear can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary. Upper side windows, including en-suite windows, must be obscure-glazed and non-opening below 1.7 m. Side or deeper designs need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Ryton homes

Connecting to the landing

The new bedroom must be reached from the existing landing, usually through a new opening in the outside wall or by taking part of an existing bedroom as a corridor. We look at the stairs and landing first, because a poor connection can waste much of the new space.

Escape window and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and high, and the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs. We design the windows to meet this.

How we'd run your project

Visit and first ideas
One of our team visits your house in Ryton, checks the walls, roof and drains, and sketches out options with you.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about extra bedroom and en-suite extensions in Ryton

Who handles building regulations for a project in Ryton?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does an extra bedroom and en-suite extension cost in Ryton?

Our guide for the West Midlands, which covers Ryton, is £2,000–£2,700 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £56,000–£75,500 (plus £5,500–£11,000 for the en-suite). Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does an extra bedroom and en-suite extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

What goes on the ground floor below a new bedroom?

Whatever suits you: a bigger kitchen, a family room, a study, a utility or a downstairs shower room. The ground floor usually costs about the same whatever it is used for, apart from kitchen units and bathroom fittings, which are priced separately.

Can an en-suite go in a room with no window?

Yes. A shower room without a window is allowed, provided it has a mechanical extract fan to the outside that meets Part F. Many people prefer a window for daylight, but if it faces a neighbour it will usually need obscure glass. We plan the extract route early so the duct is hidden.

Nearby

We also cover places near Ryton, including:

Other extensions in Ryton

All two-storey extension services in Ryton · Extra bedroom and en-suite extensions across Shropshire

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.