Somerset · England

Extra bedroom and en-suite extensions in Somerset

We design and build extra bedroom and en-suite extensions across Somerset, from the larger towns to the villages in between. Every project starts with a free site visit.

Somerset at a glance

Nation
England
Price region
South West England
Postcode areas
BA, BS, TA
Towns covered
18 listed below, plus surrounding villages
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Site visits
Free, no obligation

What an extra bedroom and en-suite extension involves

This service suits you if you need another bedroom, or want a main bedroom with its own bathroom, without converting the loft or moving. You get a first-floor layout that connects well to your landing, an en-suite designed for plumbing and ventilation, a useful room downstairs, the approvals your nation needs and the build, managed by us and carried out by vetted teams working under S&K.

Towns in Somerset include Bath (BA1), Weston-super-Mare (BS22), Taunton (TA1), Yeovil (BA20), Bridgwater (TA5) and Portishead (BS20). If yours isn't listed, we still cover it.

Guide price in South West England

Using our South West England rates, an extra bedroom and en-suite extension with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £57,500–£78,000 (plus £5,500–£11,000 for the en-suite), including VAT. Bigger or more glazed designs cost more per m². We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

SpecPer m²Typical project
Essential£1,900–£2,560 per m²£53,000–£71,500
Standard£2,060–£2,780 per m²£57,500–£78,000
Premium£2,470–£3,340 per m²£69,000–£93,500

Rules in England

In England, an extra bedroom extension at the rear can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary. Upper side windows, including en-suite windows, must be obscure-glazed and non-opening below 1.7 m. Side or deeper designs need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

The Party Wall etc. Act 1996 applies, so notices may be needed for work on or near a shared wall or boundary.

Getting the design right

Escape window and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and high, and the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs. We design the windows to meet this.

Planning the en-suite

An en-suite needs a route for the soil pipe to the drains, enough fall for waste water and an extract fan to the outside under Part F. Placing it over the ground-floor utility or near an existing drain keeps pipework short and hidden.

How we work in Somerset

  1. Look at the house

    We start in Somerset with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.

  2. Design and approvals

    We draw the extension and check it against the rules for England, then apply for planning permission or a certificate of lawfulness, whichever fits.

  3. Structure and building control

    A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.

  4. Build

    Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Towns we cover in Somerset

Extra bedroom and en-suite extensions in Somerset: questions

How much does an extra bedroom and en-suite extension cost in Somerset?

In South West England our guide is £2,060–£2,780 per m² including VAT, so about £57,500–£78,000 (plus £5,500–£11,000 for the en-suite) for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Essential and Premium specs move that by roughly 8% down or 20% up.

What goes on the ground floor below a new bedroom?

Whatever suits you: a bigger kitchen, a family room, a study, a utility or a downstairs shower room. The ground floor usually costs about the same whatever it is used for, apart from kitchen units and bathroom fittings, which are priced separately.

How big should a new double bedroom be?

There is no legal minimum size for a bedroom in a house you own, so the test is whether it works. A comfortable double needs room for the bed with space to walk round it, wardrobes and a door that opens freely. We draw furniture on the plans so you can judge the space before anything is built.

Does an extra bedroom add value to my house?

It usually does, though not always by the full cost. Nationwide's 2025 research found that adding a double bedroom to a two-bed house was linked to about 13% higher value, and a double bedroom and bathroom on a three-bed, one-bathroom house up to 24%. Local ceiling prices still apply.

Will I need planning permission in Somerset?

Somerset is in England. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.

Neighbouring areas

All extension services in Somerset · About extra bedroom and en-suite extensions

Ready to see what a second storey could do for your home?

Book a free site visit. We'll look at your house, talk through options and explain the approvals you'd need, then price the design stage in writing.

CallGuide price