Extra bedroom and en-suite extensions in Thamesmead

Before you start in Thamesmead, here's what applies.

Postcode districts: SE28
County / area: Greater London, England
Price region: London
Guide price: £67,000–£90,500 (£2,400–£3,240 per m²), plus £5,500–£11,000 for the en-suite
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Abbey Wood (1.3 miles), Belvedere (1.6 miles), Plumstead (2.1 miles)
First visit: Free, no obligation

About an extra bedroom and en-suite extension

This service suits you if you need another bedroom, or want a main bedroom with its own bathroom, without converting the loft or moving. You get a first-floor layout that connects well to your landing, an en-suite designed for plumbing and ventilation, a useful room downstairs, the approvals your nation needs and the build, managed by us and carried out by vetted teams working under S&K.

We cover postcode district SE28 in and around Thamesmead, along with neighbouring Abbey Wood, Belvedere and Plumstead.

What it costs in Thamesmead

Using our London rates, an extra bedroom and en-suite extension with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £67,000–£90,500 (plus £5,500–£11,000 for the en-suite), including VAT. Bigger or more glazed designs cost more per m². These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£2,210–£2,980 per m²	£62,000–£83,500
Standard	£2,400–£3,240 per m²	£67,000–£90,500
Premium	£2,880–£3,890 per m²	£80,500–£109,000

Planning and building regulations in Thamesmead

In England, an extra bedroom extension at the rear can be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary. Upper side windows, including en-suite windows, must be obscure-glazed and non-opening below 1.7 m. Side or deeper designs need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Thamesmead homes

Sound and privacy

Bedrooms above a kitchen or family room benefit from an insulated floor to reduce noise. Side-facing upstairs windows usually have to be obscure-glazed, so we place the main bedroom window to the rear and the en-suite window to the side where possible.

Connecting to the landing

The new bedroom must be reached from the existing landing, usually through a new opening in the outside wall or by taking part of an existing bedroom as a corridor. We look at the stairs and landing first, because a poor connection can waste much of the new space.

How we'd run your project

Understand the brief
At your home in Thamesmead we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Thamesmead.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about extra bedroom and en-suite extensions in Thamesmead

How much does an extra bedroom and en-suite extension cost in Thamesmead?

Our guide for London, which covers Thamesmead, is £2,400–£3,240 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £67,000–£90,500 (plus £5,500–£11,000 for the en-suite). Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Thamesmead?

We cover Thamesmead (SE28) and nearby places including Abbey Wood, Belvedere and Plumstead, plus the rest of Greater London. The first site visit is free.

How long does an extra bedroom and en-suite extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Does an extra bedroom add value to my house?

It usually does, though not always by the full cost. Nationwide's 2025 research found that adding a double bedroom to a two-bed house was linked to about 13% higher value, and a double bedroom and bathroom on a three-bed, one-bathroom house up to 24%. Local ceiling prices still apply.

How big should a new double bedroom be?

There is no legal minimum size for a bedroom in a house you own, so the test is whether it works. A comfortable double needs room for the bed with space to walk round it, wardrobes and a door that opens freely. We draw furniture on the plans so you can judge the space before anything is built.

Nearby

We also cover places near Thamesmead, including:

Other extensions in Thamesmead

All two-storey extension services in Thamesmead · Extra bedroom and en-suite extensions across Greater London

Book a free site visit in Thamesmead and we'll tell you what's possible, what approvals you need and what the design stage would cost.