First-floor extensions in Allerton

Allerton: the key facts for this kind of project.

Postcode districts: L19
County / area: Merseyside, England
Price region: North West England
Guide price: £24,000–£34,500 (£1,710–£2,470 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Mossley Hill (1 mile), Woolton (1.1 miles), Hunts Cross (1.4 miles)
Distance to Liverpool: about 4.6 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover Allerton (L19) and the places around it, including Mossley Hill (1.0 miles), Woolton (1.1 miles) and Hunts Cross.

What it costs in Allerton

Our guide for North West England is £1,710–£2,470 per m² including VAT. On a project with 4 m × 3.5 m of new first-floor space (14 m²), that puts a first-floor extension in Allerton at roughly £24,000–£34,500. Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,570–£2,270 per m²	£22,000–£32,000
Standard	£1,710–£2,470 per m²	£24,000–£34,500
Premium	£2,050–£2,960 per m²	£28,500–£41,500

Planning and building regulations in Allerton

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Allerton homes

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

Measure and listen
A visit to Allerton to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about first-floor extensions in Allerton

Do I need planning permission for a first-floor extension in Allerton?

Allerton is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

How much does a first-floor extension cost in Allerton?

Our guide for North West England, which covers Allerton, is £1,710–£2,470 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £24,000–£34,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

We also cover places near Allerton, including:

Other extensions in Allerton

All two-storey extension services in Allerton · First-floor extensions across Merseyside

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.