Alton · Hampshire

First-floor extensions in Alton

We plan and build first-floor extensions for homeowners in Alton and nearby. Every project starts with a free visit and a design stage priced in writing before any work begins.

Alton: the key facts for this kind of project.

Postcode districts
GU34
County / area
Hampshire, England
Price region
South East England
Guide price
£27,500–£40,000 (£1,980–£2,860 per m²)
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns
Bordon (5.5 miles), Farnham (8.8 miles), Basingstoke (9.2 miles)
Distance to Southampton
about 25.2 miles
First visit
Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

We cover postcode district GU34 in and around Alton, along with neighbouring Bordon, Farnham and Basingstoke.

What it costs in Alton

Guide prices for first-floor extensions in South East England are around £1,980–£2,860 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £27,500–£40,000. These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

SpecPer m²4 m × 3.5 m of new first-floor space (14 m²)
Essential£1,820–£2,630 per m²£25,500–£37,000
Standard£1,980–£2,860 per m²£27,500–£40,000
Premium£2,380–£3,430 per m²£33,500–£48,000

Planning and building regulations in Alton

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Alton homes

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

How we'd run your project

  1. Measure and listen

    A visit to Alton to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.

  2. Design and approvals

    We draw the extension and check it against the rules for England, then apply for planning permission or a certificate of lawfulness, whichever fits.

  3. Engineer it

    Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.

  4. On site

    One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about first-floor extensions in Alton

How much does a first-floor extension cost in Alton?

Our guide for South East England, which covers Alton, is £1,980–£2,860 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £27,500–£40,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Alton?

We cover Alton (GU34) and nearby places including Bordon, Farnham and Basingstoke, plus the rest of Hampshire. The first site visit is free.

Who handles building regulations for a project in Alton?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

Close to Alton? We work across the area, including:

Other extensions in Alton

All two-storey extension services in Alton · First-floor extensions across Hampshire

The quickest next step is a visit. We'll look at your house in Alton and give you an honest view of the options.

CallGuide price