Banstead · Surrey

First-floor extensions in Banstead

For a first-floor extension in Banstead, the first questions are always the same: how big, which approvals, and what it will cost. This page answers all three for Surrey.

Quick reference for homeowners in Banstead.

Postcode districts
KT20 and SM7
County / area
Surrey, England
Price region
South East England
Guide price
£27,500–£40,000 (£1,980–£2,860 per m²)
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns
Belmont (Greater London) (1.5 miles), Sutton (1.9 miles), Ewell (2.6 miles)
Distance to Woking
about 15.2 miles
First visit
Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Banstead sits about 15.2 miles from Woking. Closer to home, Belmont (Greater London) is 1.5 miles away and Sutton 1.9 miles.

What it costs in Banstead

Expect a first-floor extension in Banstead to land somewhere around £27,500–£40,000 for 4 m × 3.5 m of new first-floor space (14 m²). Our South East England guide rate is £1,980–£2,860 per m², including VAT. We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

SpecPer m²4 m × 3.5 m of new first-floor space (14 m²)
Essential£1,820–£2,630 per m²£25,500–£37,000
Standard£1,980–£2,860 per m²£27,500–£40,000
Premium£2,380–£3,430 per m²£33,500–£48,000

Planning and building regulations in Banstead

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Banstead homes

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

  1. Start at your house

    We come to your home in Banstead, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.

  2. Drawings and permission

    Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Banstead.

  3. Detail and price

    Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.

  4. On site

    One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about first-floor extensions in Banstead

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Do I need planning permission for a first-floor extension in Banstead?

Banstead is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Which postcodes do you cover around Banstead?

We cover Banstead (KT20 and SM7) and nearby places including Belmont (Greater London), Sutton and Ewell, plus the rest of Surrey. The first site visit is free.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Banstead

All two-storey extension services in Banstead · First-floor extensions across Surrey

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Banstead.

CallGuide price