First-floor extensions in Belgrave

Before you start in Belgrave, here's what applies.

Postcode districts: LE4
County / area: Leicestershire, England
Price region: East Midlands
Guide price: £24,500–£35,500 (£1,760–£2,550 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Leicester (1 mile), Birstall (1.2 miles), Humberstone (1.3 miles)
Distance to Leicester: about 1 mile
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover postcode district LE4 in and around Belgrave, along with neighbouring Leicester, Birstall and Humberstone.

What it costs in Belgrave

For budgeting in Belgrave, allow around £24,500–£35,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,760–£2,550 per m² including VAT for the East Midlands. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,620–£2,340 per m²	£22,500–£33,000
Standard	£1,760–£2,550 per m²	£24,500–£35,500
Premium	£2,120–£3,060 per m²	£29,500–£43,000

Planning and building regulations in Belgrave

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Belgrave homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

Free site visit
We visit your home in Belgrave, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about first-floor extensions in Belgrave

How much does a first-floor extension cost in Belgrave?

Our guide for the East Midlands, which covers Belgrave, is £1,760–£2,550 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £24,500–£35,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Do I need planning permission for a first-floor extension in Belgrave?

Belgrave is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

The same service in neighbouring towns:

Other extensions in Belgrave

All two-storey extension services in Belgrave · First-floor extensions across Leicestershire

Book a free site visit in Belgrave and we'll tell you what's possible, what approvals you need and what the design stage would cost.