First-floor extensions in Belper

The basics for Belper at a glance.

Postcode districts: DE56
County / area: Derbyshire, England
Price region: East Midlands
Guide price: £24,500–£35,500 (£1,760–£2,550 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Ripley (3.4 miles), Heanor (5.3 miles), Oakwood (Derbyshire) (5.9 miles)
Distance to Derby: about 6.9 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

Around Belper we also work in Ripley, Heanor and Oakwood (Derbyshire), and across the rest of Derbyshire. Postcode district in and near Belper: DE56.

What it costs in Belper

Our guide for the East Midlands is £1,760–£2,550 per m² including VAT. On a project with 4 m × 3.5 m of new first-floor space (14 m²), that puts a first-floor extension in Belper at roughly £24,500–£35,500. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,620–£2,340 per m²	£22,500–£33,000
Standard	£1,760–£2,550 per m²	£24,500–£35,500
Premium	£2,120–£3,060 per m²	£29,500–£43,000

Planning and building regulations in Belper

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Belper homes

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

Understand the brief
At your home in Belper we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Belper.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about first-floor extensions in Belper

Who handles building regulations for a project in Belper?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Belper?

We cover Belper (DE56) and nearby places including Ripley, Heanor and Oakwood (Derbyshire), plus the rest of Derbyshire. The first site visit is free.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

The same service in neighbouring towns:

Other extensions in Belper

All two-storey extension services in Belper · First-floor extensions across Derbyshire

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.