First-floor extensions in Belsize Park

What we'd confirm first for a project in Belsize Park.

Postcode districts: NW3
County / area: Greater London, England
Price region: London
Guide price: £30,000–£43,500 (£2,160–£3,120 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Hampstead (0.6 miles), Kilburn (0.9 miles), Chalk Farm (1 mile)
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

We cover Belsize Park (NW3) and the places around it, including Hampstead (0.6 miles), Kilburn (0.9 miles) and Chalk Farm.

What it costs in Belsize Park

Guide prices for first-floor extensions in London are around £2,160–£3,120 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £30,000–£43,500. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,990–£2,870 per m²	£28,000–£40,000
Standard	£2,160–£3,120 per m²	£30,000–£43,500
Premium	£2,590–£3,740 per m²	£36,500–£52,500

Planning and building regulations in Belsize Park

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Belsize Park homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

How we'd run your project

Look at the house
We start in Belsize Park with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about first-floor extensions in Belsize Park

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Who handles building regulations for a project in Belsize Park?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Do I need planning permission for a first-floor extension in Belsize Park?

Belsize Park is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

Other towns near Belsize Park:

Other extensions in Belsize Park

All two-storey extension services in Belsize Park · First-floor extensions across Greater London

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.