First-floor extensions in Bolton

The basics for Bolton at a glance.

Postcode districts: BL1, BL2, BL3 and BL7
County / area: Greater Manchester, England
Price region: North West England
Guide price: £24,000–£34,500 (£1,710–£2,470 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Little Lever (2.7 miles), Farnworth (2.7 miles), Little Hulton (3.5 miles)
Distance to Manchester: about 10.7 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Around Bolton we also work in Little Lever, Farnworth and Little Hulton, and across the rest of Greater Manchester. Postcode districts in and near Bolton: BL1, BL2, BL3 and BL7.

What it costs in Bolton

For budgeting in Bolton, allow around £24,000–£34,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,710–£2,470 per m² including VAT for North West England. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,570–£2,270 per m²	£22,000–£32,000
Standard	£1,710–£2,470 per m²	£24,000–£34,500
Premium	£2,050–£2,960 per m²	£28,500–£41,500

Planning and building regulations in Bolton

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Bolton homes

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

How we'd run your project

Understand the brief
At your home in Bolton we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.
Get it approved
Once you're happy with the design we submit it to the council for Bolton and deal with any questions from the planning officer.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about first-floor extensions in Bolton

How much does a first-floor extension cost in Bolton?

Our guide for North West England, which covers Bolton, is £1,710–£2,470 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £24,000–£34,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building regulations for a project in Bolton?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Bolton

All two-storey extension services in Bolton · First-floor extensions across Greater Manchester

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Bolton.