Brampton · Cumbria

First-floor extensions in Brampton

Our first-floor extensions service in Brampton covers everything: measured survey, design, planning or permitted development checks, structural design, building control and the build itself.

Before you start in Brampton, here's what applies.

Postcode districts
CA8
County / area
Cumbria, England
Price region
North West England
Guide price
£24,000–£34,500 (£1,710–£2,470 per m²)
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns
Carlisle (9 miles), Denton Holme (9.4 miles), Longtown (10.1 miles)
Distance to Carlisle
about 9 miles
First visit
Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover postcode district CA8 in and around Brampton, along with neighbouring Carlisle, Denton Holme and Longtown.

What it costs in Brampton

Our guide for North West England is £1,710–£2,470 per m² including VAT. On a project with 4 m × 3.5 m of new first-floor space (14 m²), that puts a first-floor extension in Brampton at roughly £24,000–£34,500. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

SpecPer m²4 m × 3.5 m of new first-floor space (14 m²)
Essential£1,570–£2,270 per m²£22,000–£32,000
Standard£1,710–£2,470 per m²£24,000–£34,500
Premium£2,050–£2,960 per m²£28,500–£41,500

Planning and building regulations in Brampton

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Brampton homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

  1. Start at your house

    We come to your home in Brampton, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.

  2. Plans, then approval

    Measured survey, design, then the right approval route for your house. We explain each step before we take it.

  3. Technical design

    We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.

  4. On site

    One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about first-floor extensions in Brampton

Who handles building regulations for a project in Brampton?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a first-floor extension cost in Brampton?

Our guide for North West England, which covers Brampton, is £1,710–£2,470 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £24,000–£34,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Brampton?

We cover Brampton (CA8) and nearby places including Carlisle, Denton Holme and Longtown, plus the rest of Cumbria. The first site visit is free.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

Close to Brampton? We work across the area, including:

Other extensions in Brampton

All two-storey extension services in Brampton · First-floor extensions across Cumbria

Want a figure first? Try our guide price tool, then book a free visit to firm it up.

CallGuide price