First-floor extensions in Broxbourne

The basics for Broxbourne at a glance.

Postcode districts: EN10
County / area: Hertfordshire, England
Price region: East of England
Guide price: £26,000–£37,500 (£1,850–£2,680 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Hoddesdon (1 mile), Cheshunt (3.3 miles), Waltham Abbey (4.2 miles)
Distance to Watford: about 17.3 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover Broxbourne (EN10) and the places around it, including Hoddesdon (1.0 miles), Cheshunt (3.3 miles) and Waltham Abbey.

What it costs in Broxbourne

For budgeting in Broxbourne, allow around £26,000–£37,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,850–£2,680 per m² including VAT for the East of England. Professional fees for drawings and the structural engineer are listed separately on our prices page.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,710–£2,460 per m²	£24,000–£34,500
Standard	£1,850–£2,680 per m²	£26,000–£37,500
Premium	£2,220–£3,210 per m²	£31,000–£45,000

Planning and building regulations in Broxbourne

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Broxbourne homes

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

How we'd run your project

Look at the house
We start in Broxbourne with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Get it approved
Once you're happy with the design we submit it to the council for Broxbourne and deal with any questions from the planning officer.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about first-floor extensions in Broxbourne

Who handles building regulations for a project in Broxbourne?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Broxbourne?

We cover Broxbourne (EN10) and nearby places including Hoddesdon, Cheshunt and Waltham Abbey, plus the rest of Hertfordshire. The first site visit is free.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

We also cover places near Broxbourne, including:

Other extensions in Broxbourne

All two-storey extension services in Broxbourne · First-floor extensions across Hertfordshire

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Broxbourne.