First-floor extensions in Burry Port

Useful details for planning a first-floor extension in Burry Port.

Postcode districts: SA16 and SA17
County / area: Dyfed, Wales
Price region: Wales
Guide price: £23,000–£33,500 (£1,660–£2,390 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Llanelli (3.6 miles), Gorseinon (8.9 miles), Tumble (9 miles)
Distance to Llanelli: about 3.6 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover postcode districts SA16 and SA17 in and around Burry Port, along with neighbouring Llanelli, Gorseinon and Tumble.

What it costs in Burry Port

Our guide for Wales is £1,660–£2,390 per m² including VAT. On a project with 4 m × 3.5 m of new first-floor space (14 m²), that puts a first-floor extension in Burry Port at roughly £23,000–£33,500. These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,520–£2,200 per m²	£21,500–£31,000
Standard	£1,660–£2,390 per m²	£23,000–£33,500
Premium	£1,990–£2,870 per m²	£28,000–£40,000

Planning and building regulations in Burry Port

In Wales, a first floor over a rear extension can be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 10.5 m from the rear boundary, with the ground floor within 4 m. Over a side extension, the 10.5 m, 1 m set-back and 50% width tests apply. Otherwise a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Burry Port homes

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

Visit and first ideas
One of our team visits your house in Burry Port, checks the walls, roof and drains, and sketches out options with you.
Drawings, then consent
We draw the scheme, check it against the rules in Wales, and take it through the right consent with the council.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about first-floor extensions in Burry Port

Who handles building regulations for a project in Burry Port?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Burry Port?

We cover Burry Port (SA16 and SA17) and nearby places including Llanelli, Gorseinon and Tumble, plus the rest of Dyfed. The first site visit is free.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

The same service in neighbouring towns:

Other extensions in Burry Port

All two-storey extension services in Burry Port · First-floor extensions across Dyfed

Want a figure first? Try our guide price tool, then book a free visit to firm it up.