First-floor extensions in Chelmsford

The basics for Chelmsford at a glance.

Postcode districts: CM1 and CM2
County / area: Essex, England
Price region: East of England
Guide price: £26,000–£37,500 (£1,850–£2,680 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Billericay (7.7 miles), Witham (8.6 miles), Maldon (8.8 miles)
Distance to Southend-on-Sea: about 17.2 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

Chelmsford sits about 17.2 miles from Southend-on-Sea. Closer to home, Billericay is 7.7 miles away and Witham 8.6 miles.

What it costs in Chelmsford

Using our East of England rates, a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £26,000–£37,500, including VAT. Bigger or more glazed designs cost more per m². These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,710–£2,460 per m²	£24,000–£34,500
Standard	£1,850–£2,680 per m²	£26,000–£37,500
Premium	£2,220–£3,210 per m²	£31,000–£45,000

Planning and building regulations in Chelmsford

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Chelmsford homes

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

How we'd run your project

Visit and first ideas
One of our team visits your house in Chelmsford, checks the walls, roof and drains, and sketches out options with you.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about first-floor extensions in Chelmsford

Which postcodes do you cover around Chelmsford?

We cover Chelmsford (CM1 and CM2) and nearby places including Billericay, Witham and Maldon, plus the rest of Essex. The first site visit is free.

Do I need planning permission for a first-floor extension in Chelmsford?

Chelmsford is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Who handles building regulations for a project in Chelmsford?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

The same service in neighbouring towns:

Other extensions in Chelmsford

All two-storey extension services in Chelmsford · First-floor extensions across Essex

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.