First-floor extensions in Culmore

Before you start in Culmore, here's what applies.

Postcode districts: BT48
County / area: County Londonderry, Northern Ireland
Price region: Northern Ireland
Guide price: £22,000–£32,000 (£1,580–£2,290 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary.
Nearest towns: Derry (4 miles), Eglinton (4 miles), New Buildings (7.1 miles)
Distance to Derry: about 4 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover postcode district BT48 in and around Culmore, along with neighbouring Derry, Eglinton and New Buildings.

What it costs in Culmore

Expect a first-floor extension in Culmore to land somewhere around £22,000–£32,000 for 4 m × 3.5 m of new first-floor space (14 m²). Our Northern Ireland guide rate is £1,580–£2,290 per m², including VAT. We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,460–£2,100 per m²	£20,500–£29,500
Standard	£1,580–£2,290 per m²	£22,000–£32,000
Premium	£1,900–£2,750 per m²	£26,500–£38,500

Planning and building control in Culmore

In Northern Ireland, a first floor over a rear extension can be permitted development if the extension goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with height, materials and roof pitch conditions. Over a side extension, or beyond these limits, a planning application costs £347 per dwelling.

Approval in Northern Ireland: Planning application for works to a house: £347. Councils aim to decide local applications within an average of 15 weeks; many take longer.

Building control: Building control approval from the local council under the Building Regulations (Northern Ireland), using the Technical Booklets.

Design points for Culmore homes

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

How we'd run your project

Free site visit
We visit your home in Culmore, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Get it approved
Once you're happy with the design we submit it to the council for Culmore and deal with any questions from the planning officer.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about first-floor extensions in Culmore

Do I need planning permission for a first-floor extension in Culmore?

Culmore is in Northern Ireland. It may be permitted development if it goes no more than 3 m beyond the original rear wall and stays 7 m from the rear boundary.

Who handles building control for a project in Culmore?

We handle it as part of the project. What's needed in Northern Ireland: building control approval from the local council under the Building Regulations (Northern Ireland), using the Technical Booklets. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils aim to decide local applications within an average of 15 weeks; many take longer), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

Close to Culmore? We work across the area, including:

Other extensions in Culmore

All two-storey extension services in Culmore · First-floor extensions across County Londonderry

The quickest next step is a visit. We'll look at your house in Culmore and give you an honest view of the options.