First-floor extensions in Edmonton
If you live in Edmonton and need more room without moving, a first-floor extension is worth a serious look. We handle the drawings, approvals, structure and build.
The basics for Edmonton at a glance.
- Postcode districts
- N9
- County / area
- Greater London, England
- Price region
- London
- Guide price
- £30,000–£43,500 (£2,160–£3,120 per m²)
- Approval route
- It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
- Nearest towns
- Ponders End (1.4 miles), Tottenham (1.6 miles), Southgate (1.9 miles)
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.
Around Edmonton we also work in Ponders End, Tottenham and Southgate, and across the rest of Greater London. Postcode district in and near Edmonton: N9.
What it costs in Edmonton
Our guide for London is £2,160–£3,120 per m² including VAT. On a project with 4 m × 3.5 m of new first-floor space (14 m²), that puts a first-floor extension in Edmonton at roughly £30,000–£43,500. Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,990–£2,870 per m² | £28,000–£40,000 |
| Standard | £2,160–£3,120 per m² | £30,000–£43,500 |
| Premium | £2,590–£3,740 per m² | £36,500–£52,500 |
Planning and building regulations in Edmonton
In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Edmonton homes
Replacing the flat roof
The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.
Can the existing structure take it?
Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.
How we'd run your project
Look at the house
We start in Edmonton with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.
Engineer it
Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.
Questions about first-floor extensions in Edmonton
Which postcodes do you cover around Edmonton?
We cover Edmonton (N9) and nearby places including Ponders End, Tottenham and Southgate, plus the rest of Greater London. The first site visit is free.
Who handles building regulations for a project in Edmonton?
We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
How much does a first-floor extension cost in Edmonton?
Our guide for London, which covers Edmonton, is £2,160–£3,120 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £30,000–£43,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
What happens to the room below while the first floor is built?
The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.
Will the first-floor extension match my house?
It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.
Nearby
Other towns near Edmonton:
Other extensions in Edmonton
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Edmonton · First-floor extensions across Greater London
Want a figure first? Try our guide price tool, then book a free visit to firm it up.