First-floor extensions in Falmouth
Thinking about a first-floor extension in Falmouth? We design it, take it through the approvals it needs and build it, with one team responsible from the first visit to the final certificate.
Useful details for planning a first-floor extension in Falmouth.
- Postcode districts
- TR10 and TR11
- County / area
- Cornwall, England
- Price region
- South West England
- Guide price
- £26,000–£37,500 (£1,850–£2,680 per m²)
- Approval route
- It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
- Nearest towns
- Truro (7.7 miles), Redruth (8.7 miles), Helston (9.5 miles)
- Distance to Truro
- about 7.7 miles
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.
We cover Falmouth (TR10 and TR11) and the places around it, including Truro (7.7 miles), Redruth (8.7 miles) and Helston.
What it costs in Falmouth
Guide prices for first-floor extensions in South West England are around £1,850–£2,680 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £26,000–£37,500. Keep a contingency of around 10% for things nobody can see until the ground is opened up.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,710–£2,460 per m² | £24,000–£34,500 |
| Standard | £1,850–£2,680 per m² | £26,000–£37,500 |
| Premium | £2,220–£3,210 per m² | £31,000–£45,000 |
Planning and building regulations in Falmouth
In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Falmouth homes
Tying into the house
The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.
Can the existing structure take it?
Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.
How we'd run your project
Free site visit
We visit your home in Falmouth, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Design and approvals
We draw the extension and check it against the rules for England, then apply for planning permission or a certificate of lawfulness, whichever fits.
Structure and building control
A structural engineer sizes the foundations and steels, and we get building regulations approval before work starts.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.
Questions about first-floor extensions in Falmouth
How long does a first-floor extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
How much does a first-floor extension cost in Falmouth?
Our guide for South West England, which covers Falmouth, is £1,850–£2,680 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £26,000–£37,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Which postcodes do you cover around Falmouth?
We cover Falmouth (TR10 and TR11) and nearby places including Truro, Redruth and Helston, plus the rest of Cornwall. The first site visit is free.
Will the first-floor extension match my house?
It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.
Can I build on top of my existing single-storey extension?
Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.
Nearby
The same service in neighbouring towns:
Other extensions in Falmouth
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Falmouth · First-floor extensions across Cornwall
Book a free site visit in Falmouth and we'll tell you what's possible, what approvals you need and what the design stage would cost.