First-floor extensions in Gipsy Hill
We plan and build first-floor extensions for homeowners in Gipsy Hill and nearby. Every project starts with a free visit and a design stage priced in writing before any work begins.
What we'd confirm first for a project in Gipsy Hill.
- Postcode districts
- SE21 and SE27
- County / area
- Greater London, England
- Price region
- London
- Guide price
- £30,000–£43,500 (£2,160–£3,120 per m²)
- Approval route
- It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
- Nearest towns
- Crystal Palace (0.8 miles), Upper Norwood (0.9 miles), Norbury (1.3 miles)
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.
We cover Gipsy Hill (SE21 and SE27) and the places around it, including Crystal Palace (0.8 miles), Upper Norwood (0.9 miles) and Norbury.
What it costs in Gipsy Hill
Guide prices for first-floor extensions in London are around £2,160–£3,120 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £30,000–£43,500. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,990–£2,870 per m² | £28,000–£40,000 |
| Standard | £2,160–£3,120 per m² | £30,000–£43,500 |
| Premium | £2,590–£3,740 per m² | £36,500–£52,500 |
Planning and building regulations in Gipsy Hill
In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Gipsy Hill homes
Escape and fire safety
A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.
Tying into the house
The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.
How we'd run your project
Start at your house
We come to your home in Gipsy Hill, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Gipsy Hill.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.
Questions about first-floor extensions in Gipsy Hill
Which postcodes do you cover around Gipsy Hill?
We cover Gipsy Hill (SE21 and SE27) and nearby places including Crystal Palace, Upper Norwood and Norbury, plus the rest of Greater London. The first site visit is free.
Who handles building regulations for a project in Gipsy Hill?
We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
How long does a first-floor extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Can I build on top of my existing single-storey extension?
Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.
What happens to the room below while the first floor is built?
The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.
Nearby
Nearby towns we cover for first-floor extensions:
Other extensions in Gipsy Hill
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Gipsy Hill · First-floor extensions across Greater London
Book a free site visit in Gipsy Hill and we'll tell you what's possible, what approvals you need and what the design stage would cost.