First-floor extensions in Haverhill
We plan and build first-floor extensions for homeowners in Haverhill and nearby. Every project starts with a free visit and a design stage priced in writing before any work begins.
Quick reference for homeowners in Haverhill.
- Postcode districts
- CB9
- County / area
- Suffolk, England
- Price region
- East of England
- Guide price
- £26,000–£37,500 (£1,850–£2,680 per m²)
- Approval route
- It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
- Nearest towns
- Saffron Walden (9.3 miles), Newmarket (11.3 miles), Halstead (12.7 miles)
- Distance to Ipswich
- about 30.5 miles
- First visit
- Free, no obligation
About a first-floor extension
A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.
Around Haverhill we also work in Saffron Walden, Newmarket and Halstead, and across the rest of Suffolk. Postcode district in and near Haverhill: CB9.
What it costs in Haverhill
Expect a first-floor extension in Haverhill to land somewhere around £26,000–£37,500 for 4 m × 3.5 m of new first-floor space (14 m²). Our East of England guide rate is £1,850–£2,680 per m², including VAT. These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.
| Spec | Per m² | 4 m × 3.5 m of new first-floor space (14 m²) |
|---|---|---|
| Essential | £1,710–£2,460 per m² | £24,000–£34,500 |
| Standard | £1,850–£2,680 per m² | £26,000–£37,500 |
| Premium | £2,220–£3,210 per m² | £31,000–£45,000 |
Planning and building regulations in Haverhill
In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).
Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.
Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.
Design points for Haverhill homes
Escape and fire safety
A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.
Replacing the flat roof
The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.
How we'd run your project
Free site visit
We visit your home in Haverhill, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Haverhill.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.
Questions about first-floor extensions in Haverhill
Which postcodes do you cover around Haverhill?
We cover Haverhill (CB9) and nearby places including Saffron Walden, Newmarket and Halstead, plus the rest of Suffolk. The first site visit is free.
How long does a first-floor extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Who handles building regulations for a project in Haverhill?
We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
What happens to the room below while the first floor is built?
The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.
Can I build on top of my existing single-storey extension?
Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.
Nearby
Close to Haverhill? We work across the area, including:
Other extensions in Haverhill
- Rear
- Side
- Wraparound
- Part two-storey
- Over a garage
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Haverhill · First-floor extensions across Suffolk
Book a free site visit in Haverhill and we'll tell you what's possible, what approvals you need and what the design stage would cost.