Liversedge · West Yorkshire

First-floor extensions in Liversedge

For a first-floor extension in Liversedge, the first questions are always the same: how big, which approvals, and what it will cost. This page answers all three for West Yorkshire.

What we'd confirm first for a project in Liversedge.

Postcode districts
WF15
County / area
West Yorkshire, England
Price region
Yorkshire and the Humber
Guide price
£23,000–£33,500 (£1,660–£2,390 per m²)
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns
Heckmondwike (0.7 miles), Cleckheaton (1.5 miles), Mirfield (2.2 miles)
Distance to Leeds
about 8.7 miles
First visit
Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover postcode district WF15 in and around Liversedge, along with neighbouring Heckmondwike, Cleckheaton and Mirfield.

What it costs in Liversedge

For budgeting in Liversedge, allow around £23,000–£33,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,660–£2,390 per m² including VAT for Yorkshire and the Humber. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

SpecPer m²4 m × 3.5 m of new first-floor space (14 m²)
Essential£1,520–£2,200 per m²£21,500–£31,000
Standard£1,660–£2,390 per m²£23,000–£33,500
Premium£1,990–£2,870 per m²£28,000–£40,000

Planning and building regulations in Liversedge

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Liversedge homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

  1. Look at the house

    We start in Liversedge with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.

  2. Drawings and permission

    Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Liversedge.

  3. Price it properly

    Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.

  4. Build

    Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Questions about first-floor extensions in Liversedge

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Liversedge?

We cover Liversedge (WF15) and nearby places including Heckmondwike, Cleckheaton and Mirfield, plus the rest of West Yorkshire. The first site visit is free.

Who handles building regulations for a project in Liversedge?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

The same service in neighbouring towns:

Other extensions in Liversedge

All two-storey extension services in Liversedge · First-floor extensions across West Yorkshire

Want a figure first? Try our guide price tool, then book a free visit to firm it up.

CallGuide price