First-floor extensions in Longton

Useful details for planning a first-floor extension in Longton.

Postcode districts: ST3, ST11 and ST12
County / area: Staffordshire, England
Price region: West Midlands
Guide price: £25,000–£36,500 (£1,800–£2,600 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Stoke-on-Trent (2.6 miles), Newcastle-under-Lyme (4.3 miles), Stone (5.4 miles)
Distance to Stoke-on-Trent: about 2.6 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

We cover Longton (ST3, ST11 and ST12) and the places around it, including Stoke-on-Trent (2.6 miles), Newcastle-under-Lyme (4.3 miles) and Stone.

What it costs in Longton

Expect a first-floor extension in Longton to land somewhere around £25,000–£36,500 for 4 m × 3.5 m of new first-floor space (14 m²). Our West Midlands guide rate is £1,800–£2,600 per m², including VAT. Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,660–£2,390 per m²	£23,000–£33,500
Standard	£1,800–£2,600 per m²	£25,000–£36,500
Premium	£2,160–£3,120 per m²	£30,000–£43,500

Planning and building regulations in Longton

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Longton homes

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

How we'd run your project

Understand the brief
At your home in Longton we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.
Get it approved
Once you're happy with the design we submit it to the council for Longton and deal with any questions from the planning officer.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about first-floor extensions in Longton

Do I need planning permission for a first-floor extension in Longton?

Longton is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

How much does a first-floor extension cost in Longton?

Our guide for the West Midlands, which covers Longton, is £1,800–£2,600 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £25,000–£36,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Close to Longton? We work across the area, including:

Other extensions in Longton

All two-storey extension services in Longton · First-floor extensions across Staffordshire

Book a free site visit in Longton and we'll tell you what's possible, what approvals you need and what the design stage would cost.