Pelsall · West Midlands

First-floor extensions in Pelsall

We plan and build first-floor extensions for homeowners in Pelsall and nearby. Every project starts with a free visit and a design stage priced in writing before any work begins.

Quick reference for homeowners in Pelsall.

Postcode districts
WS4
County / area
West Midlands, England
Price region
West Midlands
Guide price
£25,000–£36,500 (£1,800–£2,600 per m²)
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns
Brownhills (1.5 miles), Bloxwich (1.7 miles), Aldridge (2.7 miles)
Distance to Birmingham
about 10.6 miles
First visit
Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover postcode district WS4 in and around Pelsall, along with neighbouring Brownhills, Bloxwich and Aldridge.

What it costs in Pelsall

Guide prices for first-floor extensions in the West Midlands are around £1,800–£2,600 per m² of new floor space, including VAT. For a typical project with 4 m × 3.5 m of new first-floor space (14 m²), that's roughly £25,000–£36,500. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

SpecPer m²4 m × 3.5 m of new first-floor space (14 m²)
Essential£1,660–£2,390 per m²£23,000–£33,500
Standard£1,800–£2,600 per m²£25,000–£36,500
Premium£2,160–£3,120 per m²£30,000–£43,500

Planning and building regulations in Pelsall

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Pelsall homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Escape and fire safety

A new first-floor bedroom needs an escape window with a clear opening of at least 0.33 m², at least 450 mm wide and 450 mm high, with the bottom no more than 1,100 mm above the floor, unless there is a protected route to the stairs.

How we'd run your project

  1. Look at the house

    We start in Pelsall with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.

  2. Get it approved

    Once you're happy with the design we submit it to the council for Pelsall and deal with any questions from the planning officer.

  3. Price it properly

    Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.

  4. On site

    One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about first-floor extensions in Pelsall

Which postcodes do you cover around Pelsall?

We cover Pelsall (WS4) and nearby places including Brownhills, Bloxwich and Aldridge, plus the rest of the West Midlands. The first site visit is free.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Do I need planning permission for a first-floor extension in Pelsall?

Pelsall is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

Close to Pelsall? We work across the area, including:

Other extensions in Pelsall

All two-storey extension services in Pelsall · First-floor extensions across the West Midlands

Want a figure first? Try our guide price tool, then book a free visit to firm it up.

CallGuide price