First-floor extensions in Sevenoaks

The basics for Sevenoaks at a glance.

Postcode districts: TN13, TN14 and TN15
County / area: Kent, England
Price region: South East England
Guide price: £27,500–£40,000 (£1,980–£2,860 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Chelsfield (6.5 miles), Tonbridge (6.5 miles), Biggin Hill (7.2 miles)
Distance to Maidstone: about 14.2 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Around Sevenoaks we also work in Chelsfield, Tonbridge and Biggin Hill, and across the rest of Kent. Postcode districts in and near Sevenoaks: TN13, TN14 and TN15.

What it costs in Sevenoaks

Most of the cost of a first-floor extension is set by its size and specification. For Sevenoaks and the rest of South East England, our guide is £1,980–£2,860 per m² including VAT, so about £27,500–£40,000 for 4 m × 3.5 m of new first-floor space (14 m²). These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,820–£2,630 per m²	£25,500–£37,000
Standard	£1,980–£2,860 per m²	£27,500–£40,000
Premium	£2,380–£3,430 per m²	£33,500–£48,000

Planning and building regulations in Sevenoaks

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Sevenoaks homes

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

How we'd run your project

Free site visit
We visit your home in Sevenoaks, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about first-floor extensions in Sevenoaks

Who handles building regulations for a project in Sevenoaks?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Do I need planning permission for a first-floor extension in Sevenoaks?

Sevenoaks is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Which postcodes do you cover around Sevenoaks?

We cover Sevenoaks (TN13, TN14 and TN15) and nearby places including Chelsfield, Tonbridge and Biggin Hill, plus the rest of Kent. The first site visit is free.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Nearby

The same service in neighbouring towns:

Other extensions in Sevenoaks

All two-storey extension services in Sevenoaks · First-floor extensions across Kent

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Sevenoaks.