First-floor extensions in Severn Beach

Before you start in Severn Beach, here's what applies.

Postcode districts: BS10
County / area: Bristol, England
Price region: South West England
Guide price: £26,000–£37,500 (£1,850–£2,680 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Easton-in-Gordano (6 miles), Stoke Gifford (6.1 miles), Thornbury (7 miles)
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

Around Severn Beach we also work in Easton-in-Gordano, Stoke Gifford and Thornbury, and across the rest of Bristol. Postcode district in and near Severn Beach: BS10.

What it costs in Severn Beach

Using our South West England rates, a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £26,000–£37,500, including VAT. Bigger or more glazed designs cost more per m². Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,710–£2,460 per m²	£24,000–£34,500
Standard	£1,850–£2,680 per m²	£26,000–£37,500
Premium	£2,220–£3,210 per m²	£31,000–£45,000

Planning and building regulations in Severn Beach

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Severn Beach homes

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

Look at the house
We start in Severn Beach with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Get it approved
Once you're happy with the design we submit it to the council for Severn Beach and deal with any questions from the planning officer.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build
Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Questions about first-floor extensions in Severn Beach

Who handles building regulations for a project in Severn Beach?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Severn Beach?

We cover Severn Beach (BS10) and nearby places including Easton-in-Gordano, Stoke Gifford and Thornbury, plus the rest of Bristol. The first site visit is free.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

Nearby

Other towns near Severn Beach:

Other extensions in Severn Beach

All two-storey extension services in Severn Beach · First-floor extensions across Bristol

Tell us about your house in Severn Beach and we'll call you back to arrange a free, no-obligation visit.