First-floor extensions in Sidcup

Sidcup: the key facts for this kind of project.

Postcode districts: DA14 and DA15
County / area: Greater London, England
Price region: London
Guide price: £30,000–£43,500 (£2,160–£3,120 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Chislehurst (1.6 miles), Bexley (2.2 miles), Welling (2.5 miles)
First visit: Free, no obligation

About a first-floor extension

A first-floor extension is a new upstairs room built on top of an existing single-storey part of your house, such as a rear kitchen extension, a utility or a side annexe. It adds a bedroom, bathroom or study without enlarging the footprint. Whether it works depends mainly on whether the walls and foundations below can carry the extra load.

We cover postcode districts DA14 and DA15 in and around Sidcup, along with neighbouring Chislehurst, Bexley and Welling.

What it costs in Sidcup

Using our London rates, a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £30,000–£43,500, including VAT. Bigger or more glazed designs cost more per m². Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,990–£2,870 per m²	£28,000–£40,000
Standard	£2,160–£3,120 per m²	£30,000–£43,500
Premium	£2,590–£3,740 per m²	£36,500–£52,500

Planning and building regulations in Sidcup

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Sidcup homes

Matching the roofline

A first-floor extension often changes how the back or side of the house looks more than the original single storey did. Matching the main roof pitch and materials, and keeping the ridge below the main ridge, usually gives the best result and is expected for permitted development in England.

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

How we'd run your project

Measure and listen
A visit to Sidcup to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Get it approved
Once you're happy with the design we submit it to the council for Sidcup and deal with any questions from the planning officer.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about first-floor extensions in Sidcup

How much does a first-floor extension cost in Sidcup?

Our guide for London, which covers Sidcup, is £2,160–£3,120 per m² including VAT. A typical project with 4 m × 3.5 m of new first-floor space (14 m²) comes to about £30,000–£43,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building regulations for a project in Sidcup?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Sidcup

All two-storey extension services in Sidcup · First-floor extensions across Greater London

Book a free site visit in Sidcup and we'll tell you what's possible, what approvals you need and what the design stage would cost.