Snaresbrook · Greater London

First-floor extensions in Snaresbrook

Our first-floor extensions service in Snaresbrook covers everything: measured survey, design, planning or permitted development checks, structural design, building control and the build itself.

Before you start in Snaresbrook, here's what applies.

Postcode districts
E18
County / area
Greater London, England
Price region
London
Guide price
£30,000–£43,500 (£2,160–£3,120 per m²)
Approval route
It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns
Wanstead (0.6 miles), Leytonstone (1.2 miles), Woodford Green (1.7 miles)
First visit
Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

We cover postcode district E18 in and around Snaresbrook, along with neighbouring Wanstead, Leytonstone and Woodford Green.

What it costs in Snaresbrook

Our guide for London is £2,160–£3,120 per m² including VAT. On a project with 4 m × 3.5 m of new first-floor space (14 m²), that puts a first-floor extension in Snaresbrook at roughly £30,000–£43,500. Design fees, structural calculations and approval fees are separate and listed on our prices page.

SpecPer m²4 m × 3.5 m of new first-floor space (14 m²)
Essential£1,990–£2,870 per m²£28,000–£40,000
Standard£2,160–£3,120 per m²£30,000–£43,500
Premium£2,590–£3,740 per m²£36,500–£52,500

Planning and building regulations in Snaresbrook

In England, adding a first floor turns a single-storey extension into one of more than one storey. To be permitted development, the extension as a whole must go no more than 3 m beyond the rear wall of the original house and stay at least 7 m from the rear boundary, with matching materials and roof pitch. Over a side extension it always needs planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Snaresbrook homes

Tying into the house

The new floor and walls must line up with the existing first floor, often through a new opening in the rear wall above the old one. Floor levels, the position of upstairs windows and the existing roof all affect where the opening can go, so we survey both floors carefully.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

  1. Understand the brief

    At your home in Snaresbrook we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.

  2. Choose the approval route

    Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.

  3. Fixed price in writing

    With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.

  4. Build and hand over

    We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about first-floor extensions in Snaresbrook

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Who handles building regulations for a project in Snaresbrook?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Snaresbrook?

We cover Snaresbrook (E18) and nearby places including Wanstead, Leytonstone and Woodford Green, plus the rest of Greater London. The first site visit is free.

Will the first-floor extension match my house?

It should, and in England matching materials and roof pitch is a condition of permitted development. We match brick, tile, mortar colour and window style where we can, and tell you at the design stage if an exact brick match is not available, so you can choose between the closest match and render or cladding.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

Nearby towns we cover for first-floor extensions:

Other extensions in Snaresbrook

All two-storey extension services in Snaresbrook · First-floor extensions across Greater London

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Snaresbrook.

CallGuide price