First-floor extensions in Ystalyfera

Useful details for planning a first-floor extension in Ystalyfera.

Postcode districts: SA9
County / area: Swansea and Neath Port Talbot, Wales
Price region: Wales
Guide price: £23,000–£33,500 (£1,660–£2,390 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Brynamman (4.3 miles), Glanamman (6.9 miles), Glynneath (7.1 miles)
Distance to Swansea: about 12.3 miles
First visit: Free, no obligation

About a first-floor extension

A first-floor extension suits you if your house already has a single-storey extension and you need more space upstairs. You get a structural check of the existing walls and foundations, a design that ties the new floor into the house, the approvals your nation needs, building regulations approval and the build, managed by us and carried out by vetted teams working under S&K.

Around Ystalyfera we also work in Brynamman, Glanamman and Glynneath, and across the rest of Swansea and Neath Port Talbot. Postcode district in and near Ystalyfera: SA9.

What it costs in Ystalyfera

For budgeting in Ystalyfera, allow around £23,000–£33,500 for a first-floor extension with 4 m × 3.5 m of new first-floor space (14 m²). That's based on £1,660–£2,390 per m² including VAT for Wales. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

Spec	Per m²	4 m × 3.5 m of new first-floor space (14 m²)
Essential	£1,520–£2,200 per m²	£21,500–£31,000
Standard	£1,660–£2,390 per m²	£23,000–£33,500
Premium	£1,990–£2,870 per m²	£28,000–£40,000

Planning and building regulations in Ystalyfera

In Wales, a first floor over a rear extension can be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 10.5 m from the rear boundary, with the ground floor within 4 m. Over a side extension, the 10.5 m, 1 m set-back and 50% width tests apply. Otherwise a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Ystalyfera homes

Replacing the flat roof

The existing roof usually comes off and is replaced by a new first-floor structure. The room below is exposed for a short time, so we plan temporary weatherproofing and sequence the work to keep the kitchen or living room usable for as long as possible.

Can the existing structure take it?

Many single-storey extensions were built with foundations, walls and lintels sized for one storey. We find out what is there with trial holes and, where available, the original building control drawings. The engineer then decides whether to reuse, strengthen or rebuild parts of the structure.

How we'd run your project

Measure and listen
A visit to Ystalyfera to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in Wales before drawing in detail.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about first-floor extensions in Ystalyfera

How long does a first-floor extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Who handles building regulations for a project in Ystalyfera?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Do I need planning permission for a first-floor extension in Ystalyfera?

Ystalyfera is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Can I build on top of my existing single-storey extension?

Often yes, but only after the structure has been checked. Foundations, walls and lintels built for one storey may not carry two. We dig trial holes, look for the original building control approval and ask the structural engineer to confirm what can stay, what needs strengthening and what must be rebuilt.

What happens to the room below while the first floor is built?

The old roof is removed, so the room below is exposed for a short period. We fit temporary weather protection, plan the work so the roof comes off only when the new structure is ready, and agree with you which rooms will be out of use and for roughly how long.

Nearby

We also cover places near Ystalyfera, including:

Other extensions in Ystalyfera

All two-storey extension services in Ystalyfera · First-floor extensions across Swansea and Neath Port Talbot

The quickest next step is a visit. We'll look at your house in Ystalyfera and give you an honest view of the options.