Abergavenny · Gwent

Part single, part two-storey extensions in Abergavenny

For a part single, part two-storey extension in Abergavenny, the first questions are always the same: how big, which approvals, and what it will cost. This page answers all three for Gwent.

What we'd confirm first for a project in Abergavenny.

Postcode districts
NP7
County / area
Gwent, Wales
Price region
Wales
Guide price
£66,000–£91,000 (£1,840–£2,530 per m²)
Approval route
It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns
Gilwern (3.3 miles), Blaenavon (4.4 miles), Brynmawr (7.2 miles)
Distance to Newport (Gwent)
about 16.1 miles
First visit
Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

We cover postcode district NP7 in and around Abergavenny, along with neighbouring Gilwern, Blaenavon and Brynmawr.

What it costs in Abergavenny

Expect a part single, part two-storey extension in Abergavenny to land somewhere around £66,000–£91,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Our Wales guide rate is £1,840–£2,530 per m², including VAT. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.

SpecPer m²A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential£1,690–£2,330 per m²£61,000–£84,000
Standard£1,840–£2,530 per m²£66,000–£91,000
Premium£2,210–£3,040 per m²£79,500–£109,500

Planning and building regulations in Abergavenny

In Wales, a part two-storey rear extension can be permitted development if the first floor goes no more than 3 m and the ground floor no more than 4 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Conservation areas and other protected areas are excluded. If the design falls outside these limits, a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Abergavenny homes

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

  1. Start at your house

    We come to your home in Abergavenny, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.

  2. Drawings, then consent

    We draw the scheme, check it against the rules in Wales, and take it through the right consent with the council.

  3. Price it properly

    Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.

  4. Build and sign-off

    Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about part single, part two-storey extensions in Abergavenny

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Who handles building regulations for a project in Abergavenny?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Abergavenny?

We cover Abergavenny (NP7) and nearby places including Gilwern, Blaenavon and Brynmawr, plus the rest of Gwent. The first site visit is free.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Nearby

Close to Abergavenny? We work across the area, including:

Other extensions in Abergavenny

All two-storey extension services in Abergavenny · Part single, part two-storey extensions across Gwent

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Abergavenny.

CallGuide price