Part single, part two-storey extensions in Aberkenfig

Aberkenfig: the key facts for this kind of project.

Postcode districts: CF32
County / area: Mid Glamorgan, Wales
Price region: Wales
Guide price: £66,000–£91,000 (£1,840–£2,530 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Coity (2.1 miles), Bridgend (2.5 miles), Pencoed (4.3 miles)
Distance to Rhondda: about 10.4 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

Aberkenfig sits about 10.4 miles from Rhondda. Closer to home, Coity is 2.1 miles away and Bridgend 2.5 miles.

What it costs in Aberkenfig

For budgeting in Aberkenfig, allow around £66,000–£91,000 for a part single, part two-storey extension with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). That's based on £1,840–£2,530 per m² including VAT for Wales. We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,690–£2,330 per m²	£61,000–£84,000
Standard	£1,840–£2,530 per m²	£66,000–£91,000
Premium	£2,210–£3,040 per m²	£79,500–£109,500

Planning and building regulations in Aberkenfig

In Wales, a part two-storey rear extension can be permitted development if the first floor goes no more than 3 m and the ground floor no more than 4 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Conservation areas and other protected areas are excluded. If the design falls outside these limits, a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Aberkenfig homes

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

How we'd run your project

Free site visit
We visit your home in Aberkenfig, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Aberkenfig.
Engineer it
Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.
Finish and certify
Second fix, plastering and making good, then building control's final inspection and the completion paperwork.

Questions about part single, part two-storey extensions in Aberkenfig

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

How much does a part single, part two-storey extension cost in Aberkenfig?

Our guide for Wales, which covers Aberkenfig, is £1,840–£2,530 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Aberkenfig?

We cover Aberkenfig (CF32) and nearby places including Coity, Bridgend and Pencoed, plus the rest of Mid Glamorgan. The first site visit is free.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

Nearby towns we cover for part single, part two-storey extensions:

Other extensions in Aberkenfig

All two-storey extension services in Aberkenfig · Part single, part two-storey extensions across Mid Glamorgan

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.