Part single, part two-storey extensions in Addlestone

Quick reference for homeowners in Addlestone.

Postcode districts: KT14 and KT15
County / area: Surrey, England
Price region: South East England
Guide price: £79,000–£109,000 (£2,200–£3,030 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Chertsey (1.3 miles), Weybridge (1.5 miles), Shepperton (2.5 miles)
Distance to Woking: about 4.6 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

Addlestone sits about 4.6 miles from Woking. Closer to home, Chertsey is 1.3 miles away and Weybridge 1.5 miles.

What it costs in Addlestone

In South East England, which includes Addlestone, we'd expect a part single, part two-storey extension to cost around £79,000–£109,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), or £2,200–£3,030 per m² including VAT. Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£2,020–£2,780 per m²	£73,000–£100,000
Standard	£2,200–£3,030 per m²	£79,000–£109,000
Premium	£2,640–£3,630 per m²	£95,000–£130,500

Planning and building regulations in Addlestone

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Addlestone homes

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

How we'd run your project

Look at the house
We start in Addlestone with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Addlestone.
Engineer it
Foundations sized for two floors, steels for any openings, and building control approval, all before anyone starts on site.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about part single, part two-storey extensions in Addlestone

Do I need planning permission for a part single, part two-storey extension in Addlestone?

Addlestone is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Which postcodes do you cover around Addlestone?

We cover Addlestone (KT14 and KT15) and nearby places including Chertsey, Weybridge and Shepperton, plus the rest of Surrey. The first site visit is free.

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

We also cover places near Addlestone, including:

Other extensions in Addlestone

All two-storey extension services in Addlestone · Part single, part two-storey extensions across Surrey

Book a free site visit in Addlestone and we'll tell you what's possible, what approvals you need and what the design stage would cost.