Part single, part two-storey extensions in Ayr
Homes in Ayr with a bit of space to the side or rear can often take a part single, part two-storey extension. We'll tell you honestly whether yours can, and what approvals it needs.
Useful details for planning a part single, part two-storey extension in Ayr.
- Postcode districts
- KA6, KA7 and KA19
- County / area
- Ayrshire, Scotland
- Price region
- Scotland
- Guide price
- £67,500–£93,000 (£1,880–£2,580 per m²)
- Approval route
- Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
- Nearest towns
- Prestwick (1.6 miles), Troon (5.7 miles), Irvine (10.9 miles)
- Distance to Kilmarnock
- about 11.6 miles
- First visit
- Free, no obligation
About a part single, part two-storey extension
A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, a building warrant and the build, carried out by vetted teams working under S&K.
We cover Ayr (KA6, KA7 and KA19) and the places around it, including Prestwick (1.6 miles), Troon (5.7 miles) and Irvine.
What it costs in Ayr
Most of the cost of a part single, part two-storey extension is set by its size and specification. For Ayr and the rest of Scotland, our guide is £1,880–£2,580 per m² including VAT, so about £67,500–£93,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.
| Spec | Per m² | A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) |
|---|---|---|
| Essential | £1,730–£2,380 per m² | £62,500–£85,500 |
| Standard | £1,880–£2,580 per m² | £67,500–£93,000 |
| Premium | £2,260–£3,100 per m² | £81,000–£111,500 |
Planning and building standards in Ayr
In Scotland, because part of the extension is more than one storey, it is assessed under Class 1B, which needs at least 10 m to every boundary for permitted development. On most plots that is not possible, so the extension needs a householder application (£371, decided within two months). A building warrant is also needed before any work starts.
Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.
Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.
Design points for Ayr homes
Structure at the step
The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.
Where to put the two-storey part
The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.
How we'd run your project
Measure and listen
A visit to Ayr to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Drawings, then consent
We draw the scheme, check it against the rules in Scotland, and take it through the right consent with the council.
Fixed price in writing
With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.
Questions about part single, part two-storey extensions in Ayr
Who handles building standards for a project in Ayr?
We handle it as part of the project. What's needed in Scotland: a building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
How long does a part single, part two-storey extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils have two months to decide a local planning application), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Which postcodes do you cover around Ayr?
We cover Ayr (KA6, KA7 and KA19) and nearby places including Prestwick, Troon and Irvine, plus the rest of Ayrshire. The first site visit is free.
Can the single-storey part be deeper than the two-storey part?
With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.
Which side should the two-storey part go on?
Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.
Nearby
We also cover places near Ayr, including:
Other extensions in Ayr
- Rear
- Side
- Wraparound
- Over a garage
- First floor
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Ayr · Part single, part two-storey extensions across Ayrshire
Book a free site visit in Ayr and we'll tell you what's possible, what approvals you need and what the design stage would cost.