Part single, part two-storey extensions in Ballingry

Ballingry: the key facts for this kind of project.

Postcode districts: KY5
County / area: Fife, Scotland
Price region: Scotland
Guide price: £67,500–£93,000 (£1,880–£2,580 per m²)
Approval route: Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns: Lochgelly (2.6 miles), Kelty (3.1 miles), Cowdenbeath (3.6 miles)
Distance to Dunfermline: about 8.1 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, a building warrant and the build, carried out by vetted teams working under S&K.

Around Ballingry we also work in Lochgelly, Kelty and Cowdenbeath, and across the rest of Fife. Postcode district in and near Ballingry: KY5.

What it costs in Ballingry

Most of the cost of a part single, part two-storey extension is set by its size and specification. For Ballingry and the rest of Scotland, our guide is £1,880–£2,580 per m² including VAT, so about £67,500–£93,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,730–£2,380 per m²	£62,500–£85,500
Standard	£1,880–£2,580 per m²	£67,500–£93,000
Premium	£2,260–£3,100 per m²	£81,000–£111,500

Planning and building standards in Ballingry

In Scotland, because part of the extension is more than one storey, it is assessed under Class 1B, which needs at least 10 m to every boundary for permitted development. On most plots that is not possible, so the extension needs a householder application (£371, decided within two months). A building warrant is also needed before any work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Ballingry homes

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

Visit and first ideas
One of our team visits your house in Ballingry, checks the walls, roof and drains, and sketches out options with you.
Drawings, then consent
We draw the scheme, check it against the rules in Scotland, and take it through the right consent with the council.
Structure and building standards
A structural engineer sizes the foundations and steels, and we get a building warrant before work starts.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about part single, part two-storey extensions in Ballingry

How much does a part single, part two-storey extension cost in Ballingry?

Our guide for Scotland, which covers Ballingry, is £1,880–£2,580 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £67,500–£93,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building standards for a project in Ballingry?

We handle it as part of the project. What's needed in Scotland: a building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Ballingry?

We cover Ballingry (KY5) and nearby places including Lochgelly, Kelty and Cowdenbeath, plus the rest of Fife. The first site visit is free.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

Other towns near Ballingry:

Other extensions in Ballingry

All two-storey extension services in Ballingry · Part single, part two-storey extensions across Fife

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Ballingry.