Part single, part two-storey extensions in Bargoed

What we'd confirm first for a project in Bargoed.

Postcode districts: CF81 and NP24
County / area: Gwent, Wales
Price region: Wales
Guide price: £66,000–£91,000 (£1,840–£2,530 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Blackwood (1.5 miles), Gelligaer (1.6 miles), Hengoed (2.2 miles)
Distance to Newport (Gwent): about 12 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

Around Bargoed we also work in Blackwood, Gelligaer and Hengoed, and across the rest of Gwent. Postcode districts in and near Bargoed: CF81 and NP24.

What it costs in Bargoed

Our guide for Wales is £1,840–£2,530 per m² including VAT. On a project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), that puts a part single, part two-storey extension in Bargoed at roughly £66,000–£91,000. Steelwork for wide openings is the item most likely to move the figure; we'll know once the engineer has designed it.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,690–£2,330 per m²	£61,000–£84,000
Standard	£1,840–£2,530 per m²	£66,000–£91,000
Premium	£2,210–£3,040 per m²	£79,500–£109,500

Planning and building regulations in Bargoed

In Wales, a part two-storey rear extension can be permitted development if the first floor goes no more than 3 m and the ground floor no more than 4 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Conservation areas and other protected areas are excluded. If the design falls outside these limits, a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Bargoed homes

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

Free site visit
We visit your home in Bargoed, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Bargoed.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about part single, part two-storey extensions in Bargoed

Do I need planning permission for a part single, part two-storey extension in Bargoed?

Bargoed is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

How much does a part single, part two-storey extension cost in Bargoed?

Our guide for Wales, which covers Bargoed, is £1,840–£2,530 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Bargoed?

We cover Bargoed (CF81 and NP24) and nearby places including Blackwood, Gelligaer and Hengoed, plus the rest of Gwent. The first site visit is free.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

The same service in neighbouring towns:

Other extensions in Bargoed

All two-storey extension services in Bargoed · Part single, part two-storey extensions across Gwent

Tell us about your house in Bargoed and we'll call you back to arrange a free, no-obligation visit.