Bearsden · Glasgow and Dunbartonshire

Part single, part two-storey extensions in Bearsden

If you live in Bearsden and need more room without moving, a part single, part two-storey extension is worth a serious look. We handle the drawings, approvals, structure and build.

Bearsden: the key facts for this kind of project.

Postcode districts
G13, G15, G23 and G61
County / area
Glasgow and Dunbartonshire, Scotland
Price region
Scotland
Guide price
£67,500–£93,000 (£1,880–£2,580 per m²)
Approval route
Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns
Milngavie (1.8 miles), Clydebank (3 miles), Duntocher (3.3 miles)
Distance to Glasgow
about 4.5 miles
First visit
Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

Bearsden sits about 4.5 miles from Glasgow. Closer to home, Milngavie is 1.8 miles away and Clydebank 3.0 miles.

What it costs in Bearsden

In Scotland, which includes Bearsden, we'd expect a part single, part two-storey extension to cost around £67,500–£93,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), or £1,880–£2,580 per m² including VAT. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

SpecPer m²A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential£1,730–£2,380 per m²£62,500–£85,500
Standard£1,880–£2,580 per m²£67,500–£93,000
Premium£2,260–£3,100 per m²£81,000–£111,500

Planning and building standards in Bearsden

In Scotland, because part of the extension is more than one storey, it is assessed under Class 1B, which needs at least 10 m to every boundary for permitted development. On most plots that is not possible, so the extension needs a householder application (£371, decided within two months). A building warrant is also needed before any work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Bearsden homes

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

How we'd run your project

  1. Understand the brief

    At your home in Bearsden we agree what you need: bedroom count, bathroom, kitchen space, and how much garden you want to keep.

  2. Drawings and permission

    Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Bearsden.

  3. Fixed price in writing

    With approved drawings and calculations, we give you a fixed build price and a programme you can plan around.

  4. On site

    One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about part single, part two-storey extensions in Bearsden

Which postcodes do you cover around Bearsden?

We cover Bearsden (G13, G15, G23 and G61) and nearby places including Milngavie, Clydebank and Duntocher, plus the rest of Glasgow and Dunbartonshire. The first site visit is free.

How much does a part single, part two-storey extension cost in Bearsden?

Our guide for Scotland, which covers Bearsden, is £1,880–£2,580 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £67,500–£93,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils have two months to decide a local planning application), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Nearby

The same service in neighbouring towns:

Other extensions in Bearsden

All two-storey extension services in Bearsden · Part single, part two-storey extensions across Glasgow and Dunbartonshire

The quickest next step is a visit. We'll look at your house in Bearsden and give you an honest view of the options.

CallGuide price