Part single, part two-storey extensions in Bury

What we'd confirm first for a project in Bury.

Postcode districts: BL8 and BL9
County / area: Greater Manchester, England
Price region: North West England
Guide price: £68,500–£94,000 (£1,900–£2,610 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Radcliffe (2.8 miles), Heywood (3.3 miles), Ramsbottom (3.4 miles)
Distance to Manchester: about 8.6 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

We cover postcode districts BL8 and BL9 in and around Bury, along with neighbouring Radcliffe, Heywood and Ramsbottom.

What it costs in Bury

Most of the cost of a part single, part two-storey extension is set by its size and specification. For Bury and the rest of North West England, our guide is £1,900–£2,610 per m² including VAT, so about £68,500–£94,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,750–£2,400 per m²	£63,000–£86,500
Standard	£1,900–£2,610 per m²	£68,500–£94,000
Premium	£2,280–£3,130 per m²	£82,000–£113,000

Planning and building regulations in Bury

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Bury homes

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

Light into the kitchen

The single-storey part is the place for roof lights or a lantern, which bring daylight deep into the plan. In England, glazing is normally limited to 25% of the new floor area plus any windows removed, unless calculations show the house still performs, so we plan the balance early.

How we'd run your project

Look at the house
We start in Bury with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Bury.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about part single, part two-storey extensions in Bury

Which postcodes do you cover around Bury?

We cover Bury (BL8 and BL9) and nearby places including Radcliffe, Heywood and Ramsbottom, plus the rest of Greater Manchester. The first site visit is free.

How much does a part single, part two-storey extension cost in Bury?

Our guide for North West England, which covers Bury, is £1,900–£2,610 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £68,500–£94,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building regulations for a project in Bury?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

Close to Bury? We work across the area, including:

Other extensions in Bury

All two-storey extension services in Bury · Part single, part two-storey extensions across Greater Manchester

Book a free site visit in Bury and we'll tell you what's possible, what approvals you need and what the design stage would cost.