Part single, part two-storey extensions in Chepstow

Before you start in Chepstow, here's what applies.

Postcode districts: NP16
County / area: Gwent, Wales
Price region: Wales
Guide price: £66,000–£91,000 (£1,840–£2,530 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Caldicot (5.1 miles), Undy (7.4 miles), Magor (7.9 miles)
Distance to Newport (Gwent): about 14.3 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

Around Chepstow we also work in Caldicot, Undy and Magor, and across the rest of Gwent. Postcode district in and near Chepstow: NP16.

What it costs in Chepstow

Our guide for Wales is £1,840–£2,530 per m² including VAT. On a project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), that puts a part single, part two-storey extension in Chepstow at roughly £66,000–£91,000. The fastest way to a firmer number is a free site visit, after which we price the design stage in writing.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,690–£2,330 per m²	£61,000–£84,000
Standard	£1,840–£2,530 per m²	£66,000–£91,000
Premium	£2,210–£3,040 per m²	£79,500–£109,500

Planning and building regulations in Chepstow

In Wales, a part two-storey rear extension can be permitted development if the first floor goes no more than 3 m and the ground floor no more than 4 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Conservation areas and other protected areas are excluded. If the design falls outside these limits, a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Chepstow homes

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

How we'd run your project

Measure and listen
A visit to Chepstow to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Chepstow.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about part single, part two-storey extensions in Chepstow

Who handles building regulations for a project in Chepstow?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a part single, part two-storey extension cost in Chepstow?

Our guide for Wales, which covers Chepstow, is £1,840–£2,530 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Nearby

Other towns near Chepstow:

Other extensions in Chepstow

All two-storey extension services in Chepstow · Part single, part two-storey extensions across Gwent

Ready to talk it through? Call us or send the form and we'll arrange a visit to your home in Chepstow.