Part single, part two-storey extensions in Colwyn Bay

Quick reference for homeowners in Colwyn Bay.

Postcode districts: LL28 and LL29
County / area: Clwyd, Wales
Price region: Wales
Guide price: £66,000–£91,000 (£1,840–£2,530 per m²)
Approval route: It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
Nearest towns: Deganwy (4.2 miles), Llandudno (4.8 miles), Abergele (6 miles)
Distance to Wrexham: about 35 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension suits you if you want a generous ground floor but only need one extra room upstairs, or if a full two-storey design would affect a neighbour too much. You get design options that test where the two-storey part works best, the approvals your nation needs, structural design, building regulations approval and the build, carried out by vetted teams working under S&K.

Colwyn Bay sits about 35.0 miles from Wrexham. Closer to home, Deganwy is 4.2 miles away and Llandudno 4.8 miles.

What it costs in Colwyn Bay

For budgeting in Colwyn Bay, allow around £66,000–£91,000 for a part single, part two-storey extension with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). That's based on £1,840–£2,530 per m² including VAT for Wales. Keep a contingency of around 10% for things nobody can see until the ground is opened up.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,690–£2,330 per m²	£61,000–£84,000
Standard	£1,840–£2,530 per m²	£66,000–£91,000
Premium	£2,210–£3,040 per m²	£79,500–£109,500

Planning and building regulations in Colwyn Bay

In Wales, a part two-storey rear extension can be permitted development if the first floor goes no more than 3 m and the ground floor no more than 4 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Conservation areas and other protected areas are excluded. If the design falls outside these limits, a householder application costs £585.

Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.

Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).

Design points for Colwyn Bay homes

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

How we'd run your project

Start at your house
We come to your home in Colwyn Bay, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Design and approvals
We draw the extension and check it against the rules for Wales, then apply for planning permission or a certificate of lawfulness, whichever fits.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about part single, part two-storey extensions in Colwyn Bay

Who handles building regulations for a project in Colwyn Bay?

We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a part single, part two-storey extension cost in Colwyn Bay?

Our guide for Wales, which covers Colwyn Bay, is £1,840–£2,530 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Do I need planning permission for a part single, part two-storey extension in Colwyn Bay?

Colwyn Bay is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

Other towns near Colwyn Bay:

Other extensions in Colwyn Bay

All two-storey extension services in Colwyn Bay · Part single, part two-storey extensions across Clwyd

Send us your postcode and a few details. We'll get back to you to arrange a visit and talk through your options.