Part single, part two-storey extensions in Newton Stewart

Quick reference for homeowners in Newton Stewart.

Postcode districts: DG8
County / area: Dumfries and Galloway, Scotland
Price region: Scotland
Guide price: £67,500–£93,000 (£1,880–£2,580 per m²)
Approval route: Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.
Nearest towns: Kirkcudbright (19.1 miles), Cairnryan (21.3 miles), Stranraer (21.9 miles)
Distance to Dumfries: about 35.4 miles
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

Newton Stewart sits about 35.4 miles from Dumfries. Closer to home, Kirkcudbright is 19.1 miles away and Cairnryan 21.3 miles.

What it costs in Newton Stewart

A guide price for Newton Stewart: around £67,500–£93,000 for a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total). That works out at £1,880–£2,580 per m² of new floor space, including VAT at 20%. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£1,730–£2,380 per m²	£62,500–£85,500
Standard	£1,880–£2,580 per m²	£67,500–£93,000
Premium	£2,260–£3,100 per m²	£81,000–£111,500

Planning and building standards in Newton Stewart

In Scotland, because part of the extension is more than one storey, it is assessed under Class 1B, which needs at least 10 m to every boundary for permitted development. On most plots that is not possible, so the extension needs a householder application (£371, decided within two months). A building warrant is also needed before any work starts.

Approval in Scotland: Householder planning application: £371. Councils have two months to decide a local planning application.

Building standards: A building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks.

Design points for Newton Stewart homes

Where to put the two-storey part

The two-storey section usually works best away from the closest neighbour, with the single-storey part on that boundary side. We test a few positions against neighbours' windows, the upstairs layout and the roof shape before choosing the one to take forward.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

Free site visit
We visit your home in Newton Stewart, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in Scotland before drawing in detail.
Structure and building standards
A structural engineer sizes the foundations and steels, and we get a building warrant before work starts.
Finish and certify
Second fix, plastering and making good, then the council's final building standards inspection and the completion paperwork.

Questions about part single, part two-storey extensions in Newton Stewart

Who handles building standards for a project in Newton Stewart?

We handle it as part of the project. What's needed in Scotland: a building warrant from the council's building standards service before work starts, and a completion certificate at the end. Scotland uses its own Technical Handbooks. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How much does a part single, part two-storey extension cost in Newton Stewart?

Our guide for Scotland, which covers Newton Stewart, is £1,880–£2,580 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £67,500–£93,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Do I need planning permission for a part single, part two-storey extension in Newton Stewart?

Newton Stewart is in Scotland. Planning permission is usually needed: Class 1B permitted development only applies if every part of the extension is at least 10 m from all boundaries. A building warrant is needed before work starts.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can the single-storey part be deeper than the two-storey part?

With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.

Nearby

Close to Newton Stewart? We work across the area, including:

Other extensions in Newton Stewart

All two-storey extension services in Newton Stewart · Part single, part two-storey extensions across Dumfries and Galloway

Tell us about your house in Newton Stewart and we'll call you back to arrange a free, no-obligation visit.