Part single, part two-storey extensions in Rhoose
Thinking about a part single, part two-storey extension in Rhoose? We design it, take it through the approvals it needs and build it, with one team responsible from the first visit to the final certificate.
Before you start in Rhoose, here's what applies.
- Postcode districts
- CF62
- County / area
- Cardiff and the Vale of Glamorgan, Wales
- Price region
- Wales
- Guide price
- £66,000–£91,000 (£1,840–£2,530 per m²)
- Approval route
- It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
- Nearest towns
- Barry (3.1 miles), Llantwit Major (5.9 miles), Dinas Powys (6.9 miles)
- Distance to Cardiff
- about 9.8 miles
- First visit
- Free, no obligation
About a part single, part two-storey extension
A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.
Rhoose sits about 9.8 miles from Cardiff. Closer to home, Barry is 3.1 miles away and Llantwit Major 5.9 miles.
What it costs in Rhoose
Using our Wales rates, a part single, part two-storey extension with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000, including VAT. Bigger or more glazed designs cost more per m². Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.
| Spec | Per m² | A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) |
|---|---|---|
| Essential | £1,690–£2,330 per m² | £61,000–£84,000 |
| Standard | £1,840–£2,530 per m² | £66,000–£91,000 |
| Premium | £2,210–£3,040 per m² | £79,500–£109,500 |
Planning and building regulations in Rhoose
In Wales, a part two-storey rear extension can be permitted development if the first floor goes no more than 3 m and the ground floor no more than 4 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Conservation areas and other protected areas are excluded. If the design falls outside these limits, a householder application costs £585.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
Design points for Rhoose homes
The roof junction
Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.
Structure at the step
The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.
How we'd run your project
Free site visit
We visit your home in Rhoose, look at the structure, access and boundaries, and talk through what you want the new rooms to do.
Drawings, then consent
We draw the scheme, check it against the rules in Wales, and take it through the right consent with the council.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.
Questions about part single, part two-storey extensions in Rhoose
Which postcodes do you cover around Rhoose?
We cover Rhoose (CF62) and nearby places including Barry, Llantwit Major and Dinas Powys, plus the rest of Cardiff and the Vale of Glamorgan. The first site visit is free.
Do I need planning permission for a part single, part two-storey extension in Rhoose?
Rhoose is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.
How much does a part single, part two-storey extension cost in Rhoose?
Our guide for Wales, which covers Rhoose, is £1,840–£2,530 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £66,000–£91,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Which side should the two-storey part go on?
Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.
Can the single-storey part be deeper than the two-storey part?
With planning permission, yes, and that is often the point of the design: the ground floor projects further into the garden while the first floor stays back from neighbours. Under permitted development, the depth limits for extensions of more than one storey can apply to the whole extension, so we confirm which route applies before drawings are finalised.
Nearby
The same service in neighbouring towns:
Other extensions in Rhoose
- Rear
- Side
- Wraparound
- Over a garage
- First floor
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Rhoose · Part single, part two-storey extensions across Cardiff and the Vale of Glamorgan
Book a free site visit in Rhoose and we'll tell you what's possible, what approvals you need and what the design stage would cost.