Part single, part two-storey extensions in Southampton

Before you start in Southampton, here's what applies.

Postcode districts: SO14 and SO15
County / area: Hampshire, England
Price region: South East England
Guide price: £79,000–£109,000 (£2,200–£3,030 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Woolston (1.4 miles), Portswood (1.7 miles), Hythe (Hampshire) (3 miles)
First visit: Free, no obligation

About a part single, part two-storey extension

A part single, part two-storey extension is an extension where the ground floor is wider or deeper than the floor above, so only part of it rises to two storeys. It usually gives a large kitchen or living area with roof lights below and one bedroom or bathroom above. It is often a good way to add space while limiting the effect on neighbours.

We cover postcode districts SO14 and SO15 in and around Southampton, along with neighbouring Woolston, Portswood and Hythe (Hampshire).

What it costs in Southampton

Guide prices for part single, part two-storey extensions in South East England are around £2,200–£3,030 per m² of new floor space, including VAT. For a typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total), that's roughly £79,000–£109,000. Kitchens, bathroom fittings and flooring are priced separately so you can compare like with like.

Spec	Per m²	A 6 m × 4 m ground floor and a first floor over half of it (36 m² in total)
Essential	£2,020–£2,780 per m²	£73,000–£100,000
Standard	£2,200–£3,030 per m²	£79,000–£109,000
Premium	£2,640–£3,630 per m²	£95,000–£130,500

Planning and building regulations in Southampton

In England, the extension can only be permitted development if it goes no more than 3 m beyond the original rear wall and stays at least 7 m from the rear boundary, with matching materials and roof pitch. We check the whole design against the rules, including the 50% garden coverage limit. If any part fails, or extends beyond a side wall on two floors, you need planning permission, costing £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Southampton homes

The roof junction

Where the single-storey roof meets the two-storey wall you need a sound weathering detail, usually a lead or similar flashing, and enough height for roof lights or a lantern. We set the roof falls and the upstairs window sill heights together so they do not clash.

Structure at the step

The first-floor wall above often sits over the new open-plan space, so it needs a steel beam or frame to carry it. Loads come down at different points than in a full two-storey design, and the engineer sizes the foundations to suit each part.

How we'd run your project

Look at the house
We start in Southampton with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Detail and price
Construction drawings, engineer's calculations and building control sign-off, then a written fixed price for the build.
Build
Foundations, walls, floor, roof, windows, then first and second fix. We break through into the house as late as we can.

Questions about part single, part two-storey extensions in Southampton

How much does a part single, part two-storey extension cost in Southampton?

Our guide for South East England, which covers Southampton, is £2,200–£3,030 per m² including VAT. A typical project with a 6 m × 4 m ground floor and a first floor over half of it (36 m² in total) comes to about £79,000–£109,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building regulations for a project in Southampton?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

How long does a part single, part two-storey extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which side should the two-storey part go on?

Usually the side furthest from the nearest neighbour's windows, so the single-storey part sits nearest them and keeps their light. Other factors are where the stairs land upstairs, which room needs the extra space and where drains run. We sketch options at the design stage and explain which is most likely to be approved.

Can I add roof lights to the single-storey part?

Yes. Roof lights or a lantern over the single-storey part are one of the main reasons to choose this design, as they light the middle of a deep kitchen. In England they count towards the Part L glazing allowance, normally 25% of the new floor area plus windows removed, so we balance them with the rear doors.

Nearby

The same service in neighbouring towns:

Other extensions in Southampton

All two-storey extension services in Southampton · Part single, part two-storey extensions across Hampshire

Book a free site visit in Southampton and we'll tell you what's possible, what approvals you need and what the design stage would cost.