Two-storey extension plans and drawings in Mid Glamorgan
Planning an extension in Mid Glamorgan? This is how our plans and drawings service works, with the Wales rules and typical fees.
Mid Glamorgan at a glance
- Nation
- Wales
- Price region
- Wales
- Postcode areas
- CF
- Towns covered
- 27 listed below, plus surrounding villages
- Site visits
- Free, no obligation
What a set of extension plans involves
Two-storey extension plans involve a measured survey of your house, design options, and a set of scaled drawings showing the existing and proposed floor plans, elevations, a site plan and a location plan. These are the drawings needed for a planning application or lawful development certificate. Building regulations drawings with construction details follow as a separate, more technical set.
Towns in Mid Glamorgan include Rhondda (CF43), Tonypandy (CF40), Bridgend (CF31), Merthyr Tydfil (CF47), Coity (CF31) and Pontypridd (CF37). If yours isn't listed, we still cover it.
Fees
Planning drawings (survey and design) are a guide of £2,000–£3,500 and building regulations drawings and specification £1,500–£4,000, with your design stage priced in writing before it starts.
Rules in Wales
In Wales, the plans need to show the measurements the Welsh rules depend on: the 4 m and 3 m rear depths, the 10.5 m distances to boundaries and, for side extensions, the 1 m set-back and 50% width test. A householder application costs £585. Building regulations drawings follow the Welsh Approved Documents.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
The Party Wall etc. Act 1996 applies in Wales, so notices may be needed for work on or near a shared wall or boundary.
Getting the design right
Drawings that can be built
Drawings that ignore steel sizes, floor depths or drain runs often need redesigning once a builder prices them. We coordinate the design with the structural engineer and our build teams, so what is approved is practical to construct.
Start with a measured survey
Accurate drawings depend on accurate measurements of the house, the boundaries and neighbouring windows. We measure inside and out, note levels, drains and trees, and record the original house so permitted development limits can be checked against the right starting point.
How we work in Mid Glamorgan
Look at the house
We start in Mid Glamorgan with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Drawings and permission
Our designers produce plans and elevations, then we take care of planning or permitted development checks with the council covering Mid Glamorgan.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.
Towns we cover in Mid Glamorgan
- Rhondda
- Tonypandy
- Bridgend
- Merthyr Tydfil
- Coity
- Pontypridd
- Aberdare
- Maesteg
- Porthcawl
- Llantrisant
- Pyle
- Nelson (Mid Glamorgan)
- Treharris
- Mountain Ash
- Aberkenfig
- Tonyrefail
- Pencoed
- Beddau
- Treorchy
- Ferndale
- Hirwaun
- Brynna
- Abercynon
- Pontyclun
- Llanharan
- Pentre
- Abercanaid
Two-storey extension plans and drawings in Mid Glamorgan: questions
How long do extension plans take to prepare?
Survey, design and planning drawings usually take 4 to 8 weeks, depending on how many options you want to explore. Technical design, structural calculations and building control approval take a further 4 to 8 weeks, and this can overlap with the planning decision period.
Do I own the plans once they are drawn?
You receive copies of the drawings to use for your project, including your planning application and building regulations approval. Copyright in drawings normally stays with whoever prepares them unless agreed otherwise. Your written design stage price sets out how the drawings can be used.
Do the plans include structural calculations?
Not at planning stage. Structural calculations and beam design are prepared by a structural engineer once the design is agreed, and they form part of the building regulations package. We coordinate the engineer's work with the drawings so steel sizes and floor depths match.
Neighbouring areas
- Two-storey extension plans and drawings in Cardiff and the Vale of Glamorgan
- Two-storey extension plans and drawings in Gwent
- Two-storey extension plans and drawings in Swansea and Neath Port Talbot
- Two-storey extension plans and drawings in Bristol
All extension services in Mid Glamorgan · About two-storey extension plans and drawings
Ready to see what a second storey could do for your home?
Book a free site visit. We'll look at your house, talk through options and explain the approvals you'd need, then price the design stage in writing.