Two-storey rear extensions in Bury St Edmunds

The basics for Bury St Edmunds at a glance.

Postcode districts: IP29, IP30, IP31, IP32 and IP33
County / area: Suffolk, England
Price region: East of England
Guide price: £57,500–£78,000 (£2,060–£2,780 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Mildenhall (10.8 miles), Thetford (11.9 miles), Stowmarket (12.8 miles)
Distance to Ipswich: about 22.8 miles
First visit: Free, no obligation

About a two-storey rear extension

A two-storey rear extension suits you if you need more room on both floors and have a reasonably deep garden. You get one team for the whole job: a measured survey, the design, a check on whether permitted development applies, planning drawings where they are needed, structural design, building regulations approval and the build itself, carried out by vetted teams working under S&K. Every project starts with a free site visit.

We cover postcode districts IP29, IP30, IP31, IP32 and IP33 in and around Bury St Edmunds, along with neighbouring Mildenhall, Thetford and Stowmarket.

What it costs in Bury St Edmunds

In the East of England, which includes Bury St Edmunds, we'd expect a two-storey rear extension to cost around £57,500–£78,000 for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space), or £2,060–£2,780 per m² including VAT. These are guides, not quotes. Ground conditions, steelwork and access can move the figure either way.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£1,900–£2,560 per m²	£53,000–£71,500
Standard	£2,060–£2,780 per m²	£57,500–£78,000
Premium	£2,470–£3,340 per m²	£69,000–£93,500

Planning and building regulations in Bury St Edmunds

In England, a two-storey rear extension can be permitted development if it goes no more than 3 m beyond the rear wall of the original house, stays at least 7 m from the rear boundary and matches the house's materials and roof pitch. It is not permitted development in conservation areas, National Landscapes, National Parks, World Heritage Sites or the Broads. Otherwise a householder application costs £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Bury St Edmunds homes

Opening up the ground floor

Knocking through the old rear wall means steel beams to carry the first floor and roof above. The structural engineer sets the beam sizes, padstones and any posts, and we plan them early so the open-plan layout you want is the one that gets built.

Upstairs layout and windows

Bedrooms above need a window big enough for escape or a protected route to the stairs. Side-facing upstairs windows normally have to be obscure-glazed and fixed below 1.7 m, so we put the main bedroom windows in the rear wall and use roof lights where extra daylight is needed.

How we'd run your project

Visit and first ideas
One of our team visits your house in Bury St Edmunds, checks the walls, roof and drains, and sketches out options with you.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.

Questions about two-storey rear extensions in Bury St Edmunds

Do I need planning permission for a two-storey rear extension in Bury St Edmunds?

Bury St Edmunds is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

How long does a two-storey rear extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

Which postcodes do you cover around Bury St Edmunds?

We cover Bury St Edmunds (IP29, IP30, IP31, IP32 and IP33) and nearby places including Mildenhall, Thetford and Stowmarket, plus the rest of Suffolk. The first site visit is free.

Can I have a balcony on a two-storey rear extension?

In England, balconies, verandas and raised platforms are not permitted development, so a balcony on a two-storey rear extension needs planning permission. A Juliet balcony, a guard rail across full-height doors with no platform to stand on, is often a practical alternative, but it still needs checking against the rules and the council's approach to overlooking.

Will a two-storey rear extension block my neighbour's light?

It can if it is too deep or too close to the boundary, which is why councils look closely at its effect on neighbouring windows and gardens. We test the design against light and outlook early, keep the first floor shorter or set in where needed, and use a hipped roof to reduce bulk on the boundary side.

Nearby

Other towns near Bury St Edmunds:

Other extensions in Bury St Edmunds

All two-storey extension services in Bury St Edmunds · Two-storey rear extensions across Suffolk

Book a free site visit in Bury St Edmunds and we'll tell you what's possible, what approvals you need and what the design stage would cost.