Two-storey rear extensions in Crumpsall

Before you start in Crumpsall, here's what applies.

Postcode districts: M8
County / area: Greater Manchester, England
Price region: North West England
Guide price: £53,000–£72,000 (£1,900–£2,560 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Blackley (1.2 miles), Cheetham Hill (1.4 miles), Prestwich (1.9 miles)
Distance to Manchester: about 2.6 miles
First visit: Free, no obligation

About a two-storey rear extension

A two-storey rear extension suits you if you need more room on both floors and have a reasonably deep garden. You get one team for the whole job: a measured survey, the design, a check on whether permitted development applies, planning drawings where they are needed, structural design, building regulations approval and the build itself, carried out by vetted teams working under S&K. Every project starts with a free site visit.

We cover postcode district M8 in and around Crumpsall, along with neighbouring Blackley, Cheetham Hill and Prestwich.

What it costs in Crumpsall

For budgeting in Crumpsall, allow around £53,000–£72,000 for a two-storey rear extension with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). That's based on £1,900–£2,560 per m² including VAT for North West England. We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£1,750–£2,360 per m²	£49,000–£66,000
Standard	£1,900–£2,560 per m²	£53,000–£72,000
Premium	£2,280–£3,080 per m²	£64,000–£86,000

Planning and building regulations in Crumpsall

In England, a two-storey rear extension can be permitted development if it goes no more than 3 m beyond the rear wall of the original house, stays at least 7 m from the rear boundary and matches the house's materials and roof pitch. It is not permitted development in conservation areas, National Landscapes, National Parks, World Heritage Sites or the Broads. Otherwise a householder application costs £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Crumpsall homes

Depth and neighbours' light

Councils check that a two-storey rear extension does not take too much light or outlook from neighbouring windows, and many use a 45-degree line drawn from the nearest habitable window. We test this at sketch stage, so the depth you are shown is one that can realistically be approved.

Roof form

A hipped or gabled roof that matches the pitch of the main house usually looks best, and matching the pitch is a permitted development condition in England. Keeping the ridge below the main ridge makes the extension read as secondary and avoids awkward junctions with existing gutters and windows.

How we'd run your project

Visit and first ideas
One of our team visits your house in Crumpsall, checks the walls, roof and drains, and sketches out options with you.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in England before drawing in detail.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.

Questions about two-storey rear extensions in Crumpsall

Who handles building regulations for a project in Crumpsall?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Which postcodes do you cover around Crumpsall?

We cover Crumpsall (M8) and nearby places including Blackley, Cheetham Hill and Prestwich, plus the rest of Greater Manchester. The first site visit is free.

How much does a two-storey rear extension cost in Crumpsall?

Our guide for North West England, which covers Crumpsall, is £1,900–£2,560 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £53,000–£72,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Can I have a balcony on a two-storey rear extension?

In England, balconies, verandas and raised platforms are not permitted development, so a balcony on a two-storey rear extension needs planning permission. A Juliet balcony, a guard rail across full-height doors with no platform to stand on, is often a practical alternative, but it still needs checking against the rules and the council's approach to overlooking.

Will a two-storey rear extension block my neighbour's light?

It can if it is too deep or too close to the boundary, which is why councils look closely at its effect on neighbouring windows and gardens. We test the design against light and outlook early, keep the first floor shorter or set in where needed, and use a hipped roof to reduce bulk on the boundary side.

Nearby

Nearby towns we cover for two-storey rear extensions:

Other extensions in Crumpsall

All two-storey extension services in Crumpsall · Two-storey rear extensions across Greater Manchester

Book a free site visit in Crumpsall and we'll tell you what's possible, what approvals you need and what the design stage would cost.