Two-storey rear extensions in Dinnington

Dinnington: the key facts for this kind of project.

Postcode districts: S25
County / area: South Yorkshire, England
Price region: Yorkshire and the Humber
Guide price: £51,500–£69,500 (£1,840–£2,480 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Maltby (3.5 miles), Worksop (5.5 miles), Killamarsh (5.7 miles)
Distance to Sheffield: about 11 miles
First visit: Free, no obligation

About a two-storey rear extension

A two-storey rear extension is a new two-floor addition built onto the back of your house, usually giving a larger kitchen or living space on the ground floor and one or two bedrooms or a bathroom above. Because both floors share one set of foundations and one roof, it adds a lot of floor space for the garden it uses. In some cases it can be built under permitted development, depending on where you live.

We cover Dinnington (S25) and the places around it, including Maltby (3.5 miles), Worksop (5.5 miles) and Killamarsh.

What it costs in Dinnington

Expect a two-storey rear extension in Dinnington to land somewhere around £51,500–£69,500 for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Our Yorkshire and the Humber guide rate is £1,840–£2,480 per m², including VAT. We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£1,690–£2,290 per m²	£47,500–£64,000
Standard	£1,840–£2,480 per m²	£51,500–£69,500
Premium	£2,210–£2,980 per m²	£62,000–£83,500

Planning and building regulations in Dinnington

In England, a two-storey rear extension can be permitted development if it goes no more than 3 m beyond the rear wall of the original house, stays at least 7 m from the rear boundary and matches the house's materials and roof pitch. It is not permitted development in conservation areas, National Landscapes, National Parks, World Heritage Sites or the Broads. Otherwise a householder application costs £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Dinnington homes

Foundations and drains

Foundations for two storeys carry more load than a single storey and may need to go deeper near trees or on clay. Rear extensions often sit near drains, so we check sewer records early, as building over or near a public sewer may need the water company's agreement.

Upstairs layout and windows

Bedrooms above need a window big enough for escape or a protected route to the stairs. Side-facing upstairs windows normally have to be obscure-glazed and fixed below 1.7 m, so we put the main bedroom windows in the rear wall and use roof lights where extra daylight is needed.

How we'd run your project

Start at your house
We come to your home in Dinnington, measure up, check the ground floor walls and roof structure, and note anything near the boundaries.
Drawings, then consent
We draw the scheme, check it against the rules in England, and take it through the right consent with the council.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
On site
One project lead runs the job, keeps you updated and arranges inspections at each stage until completion.

Questions about two-storey rear extensions in Dinnington

How much does a two-storey rear extension cost in Dinnington?

Our guide for Yorkshire and the Humber, which covers Dinnington, is £1,840–£2,480 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £51,500–£69,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Which postcodes do you cover around Dinnington?

We cover Dinnington (S25) and nearby places including Maltby, Worksop and Killamarsh, plus the rest of South Yorkshire. The first site visit is free.

Do I need planning permission for a two-storey rear extension in Dinnington?

Dinnington is in England, so England planning rules apply. It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.

Will a two-storey rear extension block my neighbour's light?

It can if it is too deep or too close to the boundary, which is why councils look closely at its effect on neighbouring windows and gardens. We test the design against light and outlook early, keep the first floor shorter or set in where needed, and use a hipped roof to reduce bulk on the boundary side.

Can I have a balcony on a two-storey rear extension?

In England, balconies, verandas and raised platforms are not permitted development, so a balcony on a two-storey rear extension needs planning permission. A Juliet balcony, a guard rail across full-height doors with no platform to stand on, is often a practical alternative, but it still needs checking against the rules and the council's approach to overlooking.

Nearby

Close to Dinnington? We work across the area, including:

Other extensions in Dinnington

All two-storey extension services in Dinnington · Two-storey rear extensions across South Yorkshire

Book a free site visit in Dinnington and we'll tell you what's possible, what approvals you need and what the design stage would cost.