Two-storey rear extensions in Glynneath
We cover Glynneath and the rest of Swansea and Neath Port Talbot for two-storey rear extensions. Start with a free site visit and a plain-English view of what your house and plot can take.
Useful details for planning a two-storey rear extension in Glynneath.
- Postcode districts
- SA11
- County / area
- Swansea and Neath Port Talbot, Wales
- Price region
- Wales
- Guide price
- £51,500–£69,500 (£1,840–£2,480 per m²)
- Approval route
- It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary.
- Nearest towns
- Hirwaun (4.7 miles), Ystalyfera (7.1 miles), Aberdare (7.6 miles)
- Distance to Swansea
- about 16.4 miles
- First visit
- Free, no obligation
About a two-storey rear extension
A two-storey rear extension suits you if you need more room on both floors and have a reasonably deep garden. You get one team for the whole job: a measured survey, the design, a check on whether permitted development applies, planning drawings where they are needed, structural design, building regulations approval and the build itself, carried out by vetted teams working under S&K. Every project starts with a free site visit.
Around Glynneath we also work in Hirwaun, Ystalyfera and Aberdare, and across the rest of Swansea and Neath Port Talbot. Postcode district in and near Glynneath: SA11.
What it costs in Glynneath
Expect a two-storey rear extension in Glynneath to land somewhere around £51,500–£69,500 for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Our Wales guide rate is £1,840–£2,480 per m², including VAT. Keep a contingency of around 10% for things nobody can see until the ground is opened up.
| Spec | Per m² | A 4 m × 3.5 m footprint on two floors (28 m² of new floor space) |
|---|---|---|
| Essential | £1,690–£2,290 per m² | £47,500–£64,000 |
| Standard | £1,840–£2,480 per m² | £51,500–£69,500 |
| Premium | £2,210–£2,980 per m² | £62,000–£83,500 |
Planning and building regulations in Glynneath
In Wales, a two-storey rear extension can be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor at least 10.5 m from the rear boundary. Nothing within 2 m of a boundary can be higher than 4 m. Conservation areas and other protected areas are excluded, and a householder application costs £585.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
Design points for Glynneath homes
Upstairs layout and windows
Bedrooms above need a window big enough for escape or a protected route to the stairs. Side-facing upstairs windows normally have to be obscure-glazed and fixed below 1.7 m, so we put the main bedroom windows in the rear wall and use roof lights where extra daylight is needed.
Opening up the ground floor
Knocking through the old rear wall means steel beams to carry the first floor and roof above. The structural engineer sets the beam sizes, padstones and any posts, and we plan them early so the open-plan layout you want is the one that gets built.
How we'd run your project
Look at the house
We start in Glynneath with a free visit: measurements, photos, a look at the loft and drains, and a frank chat about budget.
Get it approved
Once you're happy with the design we submit it to the council for Glynneath and deal with any questions from the planning officer.
Price it properly
Once the engineer's calculations are in, we fix the build price in writing, with a clear list of what's included.
Build it
The new structure goes up first, then we open into the house, finish inside and get the completion certificate.
Questions about two-storey rear extensions in Glynneath
How long does a two-storey rear extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Do I need planning permission for a two-storey rear extension in Glynneath?
Glynneath is in Wales, so Wales planning rules apply. It may be permitted development if the ground floor goes no more than 4 m and the first floor no more than 3 m beyond the original rear wall, with the first floor 10.5 m from the rear boundary. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.
Who handles building regulations for a project in Glynneath?
We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
Which postcodes do you cover around Glynneath?
We cover Glynneath (SA11) and nearby places including Hirwaun, Ystalyfera and Aberdare, plus the rest of Swansea and Neath Port Talbot. The first site visit is free.
Will a two-storey rear extension block my neighbour's light?
It can if it is too deep or too close to the boundary, which is why councils look closely at its effect on neighbouring windows and gardens. We test the design against light and outlook early, keep the first floor shorter or set in where needed, and use a hipped roof to reduce bulk on the boundary side.
Nearby
The same service in neighbouring towns:
Other extensions in Glynneath
- Side
- Wraparound
- Part two-storey
- Over a garage
- First floor
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Glynneath · Two-storey rear extensions across Swansea and Neath Port Talbot
Book a free site visit in Glynneath and we'll tell you what's possible, what approvals you need and what the design stage would cost.