Two-storey rear extensions in Pinxton

Before you start in Pinxton, here's what applies.

Postcode districts: DE55
County / area: Derbyshire, England
Price region: East Midlands
Guide price: £55,000–£74,000 (£1,960–£2,650 per m²)
Approval route: It may be permitted development if it goes no more than 3 m beyond the original rear wall (counting any single-storey part) and stays 7 m from the rear boundary; otherwise it needs planning permission.
Nearest towns: Alfreton (2.8 miles), Kirkby-in-Ashfield (3.1 miles), Sutton-in-Ashfield (3.4 miles)
Distance to Derby: about 13.3 miles
First visit: Free, no obligation

About a two-storey rear extension

A two-storey rear extension is a new two-floor addition built onto the back of your house, usually giving a larger kitchen or living space on the ground floor and one or two bedrooms or a bathroom above. Because both floors share one set of foundations and one roof, it adds a lot of floor space for the garden it uses. In some cases it can be built under permitted development, depending on where you live.

We cover postcode district DE55 in and around Pinxton, along with neighbouring Alfreton, Kirkby-in-Ashfield and Sutton-in-Ashfield.

What it costs in Pinxton

Expect a two-storey rear extension in Pinxton to land somewhere around £55,000–£74,000 for a 4 m × 3.5 m footprint on two floors (28 m² of new floor space). Our East Midlands guide rate is £1,960–£2,650 per m², including VAT. Design fees, structural calculations and approval fees are separate and listed on our prices page.

Spec	Per m²	A 4 m × 3.5 m footprint on two floors (28 m² of new floor space)
Essential	£1,800–£2,430 per m²	£50,500–£68,000
Standard	£1,960–£2,650 per m²	£55,000–£74,000
Premium	£2,350–£3,180 per m²	£66,000–£89,000

Planning and building regulations in Pinxton

In England, a two-storey rear extension can be permitted development if it goes no more than 3 m beyond the rear wall of the original house, stays at least 7 m from the rear boundary and matches the house's materials and roof pitch. It is not permitted development in conservation areas, National Landscapes, National Parks, World Heritage Sites or the Broads. Otherwise a householder application costs £548 (or £575 for applications made from 8 December 2026).

Approval in England: Householder planning application: £548 (or £575 for applications made from 8 December 2026). Lawful development certificate: £274 (about £288 for applications from 8 December 2026). Councils should decide householder applications within 8 weeks of validation.

Building regulations: Building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end.

Design points for Pinxton homes

Opening up the ground floor

Knocking through the old rear wall means steel beams to carry the first floor and roof above. The structural engineer sets the beam sizes, padstones and any posts, and we plan them early so the open-plan layout you want is the one that gets built.

Foundations and drains

Foundations for two storeys carry more load than a single storey and may need to go deeper near trees or on clay. Rear extensions often sit near drains, so we check sewer records early, as building over or near a public sewer may need the water company's agreement.

How we'd run your project

Measure and listen
A visit to Pinxton to understand how you live in the house now and what the extra rooms need to do, plus a first look at the structure.
Plans, then approval
Measured survey, design, then the right approval route for your house. We explain each step before we take it.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build and sign-off
Vetted teams working under S&K build the extension, and we arrange the building control completion certificate at the end.

Questions about two-storey rear extensions in Pinxton

How long does a two-storey rear extension take?

Allow 4 to 8 weeks for survey and design, then the approval period (councils should decide householder applications within 8 weeks of validation), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.

How much does a two-storey rear extension cost in Pinxton?

Our guide for the East Midlands, which covers Pinxton, is £1,960–£2,650 per m² including VAT. A typical project with a 4 m × 3.5 m footprint on two floors (28 m² of new floor space) comes to about £55,000–£74,000. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.

Who handles building regulations for a project in Pinxton?

We handle it as part of the project. What's needed in England: building regulations approval (full plans recommended) from the council or a registered building control approver, with a completion certificate at the end. We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.

Will a two-storey rear extension block my neighbour's light?

It can if it is too deep or too close to the boundary, which is why councils look closely at its effect on neighbouring windows and gardens. We test the design against light and outlook early, keep the first floor shorter or set in where needed, and use a hipped roof to reduce bulk on the boundary side.

Can I have a balcony on a two-storey rear extension?

In England, balconies, verandas and raised platforms are not permitted development, so a balcony on a two-storey rear extension needs planning permission. A Juliet balcony, a guard rail across full-height doors with no platform to stand on, is often a practical alternative, but it still needs checking against the rules and the council's approach to overlooking.

Nearby

The same service in neighbouring towns:

Other extensions in Pinxton

All two-storey extension services in Pinxton · Two-storey rear extensions across Derbyshire

Book a free site visit in Pinxton and we'll tell you what's possible, what approvals you need and what the design stage would cost.