Two-storey side extensions in Brecon
Homes in Brecon with a bit of space to the side or rear can often take a two-storey side extension. We'll tell you honestly whether yours can, and what approvals it needs.
Useful details for planning a two-storey side extension in Brecon.
- Postcode districts
- LD3
- County / area
- Powys, Wales
- Price region
- Wales
- Guide price
- £79,000–£106,500 (£1,890–£2,530 per m²)
- Approval route
- Can be permitted development in Wales if it is 10.5 m from the side boundary, set back 1 m from the front and doesn't widen the house by more than half; otherwise planning permission.
- Nearest towns
- Brynmawr (13.4 miles), Tredegar (13.4 miles), Rhymney (13.6 miles)
- Distance to Newtown
- about 39.6 miles
- First visit
- Free, no obligation
About a two-storey side extension
A two-storey side extension suits a detached or semi-detached house with a side garden, driveway or garage wide enough to build on. You get a design that sits comfortably on the street, a planning application or permitted development check depending on your nation, structural design, building regulations approval and the build itself. We manage the whole process, and the work is carried out by vetted teams working under S&K.
We cover postcode district LD3 in and around Brecon, along with neighbouring Brynmawr, Tredegar and Rhymney.
What it costs in Brecon
In Wales, which includes Brecon, we'd expect a two-storey side extension to cost around £79,000–£106,500 for a 3 m × 7 m footprint on two floors (42 m² of new floor space), or £1,890–£2,530 per m² including VAT. We'll give you a written design-stage price first, then a fixed build price once the drawings are agreed.
| Spec | Per m² | A 3 m × 7 m footprint on two floors (42 m² of new floor space) |
|---|---|---|
| Essential | £1,740–£2,330 per m² | £73,000–£98,000 |
| Standard | £1,890–£2,530 per m² | £79,000–£106,500 |
| Premium | £2,260–£3,040 per m² | £95,000–£127,500 |
Planning and building regulations in Brecon
In Wales, a two-storey side extension can be permitted development if it is at least 10.5 m from the boundary opposite the side wall, set back at least 1 m from the front of the house and does not increase the house's widest width by more than 50%. If it fails any test, or the house is in a protected area, a householder application costs £585.
Approval in Wales: Householder planning application: £585. Councils normally decide householder applications within 8 weeks.
Building regulations: Building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency).
Design points for Brecon homes
Matching the ridge and roof
A hipped house usually needs a hipped extension roof, and a gabled house a gable. Matching the pitch, tiles, ridge detail and brick bond is what makes a side extension look original rather than added, and councils look closely at it on a front-facing addition.
Side windows, boundaries and gutters
Upstairs windows in the side wall face the neighbour, so they are usually obscure-glazed and fixed, or left out. Building close to the boundary also raises questions about foundations, overhanging gutters and access for maintenance, so we design the eaves and gutter to stay within your land.
How we'd run your project
Visit and first ideas
One of our team visits your house in Brecon, checks the walls, roof and drains, and sketches out options with you.
Choose the approval route
Some designs fit permitted development, most need a householder application. We decide which applies in Wales before drawing in detail.
Technical design
We prepare the building regulations drawings, structural calculations and specification so the build price can be fixed.
Build and hand over
We manage the build from groundworks to decoration-ready finish and hand over with the completion paperwork.
Questions about two-storey side extensions in Brecon
Do I need planning permission for a two-storey side extension in Brecon?
Brecon is in Wales, so Wales planning rules apply. Can be permitted development in Wales if it is 10.5 m from the side boundary, set back 1 m from the front and doesn't widen the house by more than half; otherwise planning permission. If in doubt, a lawful development certificate or a planning application gives you certainty before you build.
How much does a two-storey side extension cost in Brecon?
Our guide for Wales, which covers Brecon, is £1,890–£2,530 per m² including VAT. A typical project with a 3 m × 7 m footprint on two floors (42 m² of new floor space) comes to about £79,000–£106,500. Design and approval fees are extra, and we fix the build price in writing once the design is agreed.
Who handles building regulations for a project in Brecon?
We handle it as part of the project. What's needed in Wales: building regulations approval under the Welsh Approved Documents, which differ from England's in places (notably energy efficiency). We prepare the drawings and the engineer's calculations, book the inspections and pass you the completion paperwork at the end.
How long does a two-storey side extension take?
Allow 4 to 8 weeks for survey and design, then the approval period (councils normally decide householder applications within 8 weeks), then 4 to 8 weeks of technical design, which can overlap. The build itself usually takes 14 to 20 weeks, longer for large or complex designs.
Can I build a two-storey side extension over my driveway?
Yes, if the drive is wide enough for a useful room and the council accepts the design. You may lose off-road parking, which some councils weigh up, and the foundations need to suit the ground below. We check parking, drains and meter positions at the free site visit before any drawings are prepared.
Nearby
We also cover places near Brecon, including:
Other extensions in Brecon
- Rear
- Wraparound
- Part two-storey
- Over a garage
- First floor
- Semi-detached
- Detached
- Kitchen and bedrooms
- Bedroom and en-suite
All two-storey extension services in Brecon · Two-storey side extensions across Powys
Book a free site visit in Brecon and we'll tell you what's possible, what approvals you need and what the design stage would cost.